Is blue wire L or N?
IEC (most of Europe) AC power circuit wiring color codes
| Function | label | Color, IEC |
|---|---|---|
| Neutral | N | blue |
| Line, single phase | L | brown |
| Line, 3-phase | L1 | brown |
| Line, 3-phase | L2 | black |
What does blue wire connect to?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
What is the blue wire for on a thermostat?
The Blue or “C” Wire C wires or varying colors apply to every thermostat, but blue C wires belong to thermostats attached to a heat pump. Blue wires are for heat pumps, like orange wires. This wire connects to terminal B on your thermostat.
Is blue wire live or neutral?
The blue wire, also referred to as the neutral wire, has the function of transferring electricity away from the appliance. The brown wire, otherwise known as the live wire, transfers electricity to the appliance. The green and yellow wire is also referred to as the earth wire and has a key safety function.
Is blue wire ground?
Other Colored Wires These are the most common colors used in electrical wiring. Blue and yellow wires are sometimes used as hot wires and as travelers, green wires (and bare copper wires) are ground wires, and white and gray wires are neutral.
Where does the blue wire go?
Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground.
Is blue wire common?
The blue wire, or C-wire, is known as the common wire. It’s there to provide power to the thermostat. Power comes into the thermostat on a wire connected to the transformer, which is usually red, and returns to the transformer on the C-wire, which is usually blue, but it can be black.
What is the purple wire on a fuel pump?
Here is what I know, The purple wire from the loom to the pump is the 12v supply from the relay. And is a smaller gauge. The black larger gauge from the loom is is the fuel level sending unit signal. The gray from the loom is fuel level sending unit ground, and is also larger guage.
Which wire does the blue wire go to?
Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground. Red wire is sometimes included and acts as a conductor to carry power to the light kit.
Are there any charging stations for blue gas?
Despite all the hype surrounding blue gas fuel cells, they are decidedly more expensive than the batteries used on EV’s and there is almost no filling up network for blue gas. On the other hand Charging stations for EV’s are in an uptrend.
Can a fuel pump be connected to a positive wire?
The positive wire coming from the fuel pump can now be connected to the positive wire coming from your vehicle’s wiring harness. Make sure the connection is tight and secure.
How can you tell the color of a wire?
WIRE CODE IDENTIFICATION. Each wire shown in the diagrams contains a code (Fig. 1) which identifies the main circuit, part of the main circuit, gauge of wire, and color. The color is shown as a two-letter code, which can be identified by referring to the Wire Color Code Chart (Fig. 2).
What are the colors of an 18 gauge wire?
COLOR OF WIRE (Light Blue with Yellow Tracer) GAUGE OF WIRE (18 Gauge) PART OF MAIN CIRCUIT (Varies Depending on Equipment) MAIN CIRCUIT IDENTIFICATION A 2 18 LB/YL Color Code Color Color Code Color BK BLACK OR ORANGE BL BLUE PK PINK BR BROWN RD RED DB DARK BLUE TN TAN DG DARK GREEN VT VIOLET GY GRAY WT WHITE LB LIGHT BLUE YL YELLOW LG LIGHT GREEN