What kind of engine does a Toyota 4 Runner have?
The early Xtra cab and long bed pickups are ~113″ wheel base Here is a full table of 22RE ECU part number and application info. Off-Road.com has an excellent page on 4-cylinder Toyota engines The Aisin Seiki W56 is a five-speed, fully-synchronized manual transmission is found in Toyota 4×4’s with the 22R-E engine: Gear
What is the idle speed of a Toyota 4Runner?
2.28:1 To put this in perspective, take a typical engine idle speed of 800 RPM and using 33″ tires with the above gearing, your speed is about 29 feet/minute, or less than 1/3 MPH! FYI: My 22RE engine will stall in lo-lo-2nd gear at idle (121:1) but will not stall in lo-lo-1st (224:1), even up a steep hill w/ brakes applied.
What kind of gear ratio does a Toyota 4Runner have?
There are 4 common factory gear ratios for the ’84-’95 pickups and 4Runners. What ratio your truck has depends on what type of transmission it came with (manual/4 speed) or automatic) and whether it came with the factory 31″ tire option (early ’90s SR5 option) or the normal 28″ (P22575R15) tires, as noted below:
What kind of housing does a Toyota 4Runner use?
The 4- and 6-cyl housings can be distinguised by the number and style of reinforcing ribs present. The 4- and 6-cyl housings may be used in rear or front applications.
Today at the shop we had a 2000 Toyota 4 runner with a V6 3.4 engine. The truck ran just fine before the previous repair shop had replaced the timing belt. After the timing belt was replaced the truck would crank but would not start. After months of them trying to fix the problem by replacing unnecessary parts, they brought the truck to my shop.
Why does my Toyota 4Runner crank but not start?
After the timing belt was replaced the truck would crank but would not start. After months of them trying to fix the problem by replacing unnecessary parts, they brought the truck to my shop. I figured the problem out in about 20 minutes. I hope you enjoy the video! please like, comment and subscribe to the channel! Loading…
Is the 1984-89 Toyota 4Runner a collector car?
These days, the 1984–89 Toyota 4Runner is becoming a sought-after collector vehicle in the U.S., so much so that it was recently added to the Hagerty Price Guide after prices and insurance quotes began to rise. “The number of 4Runners being added to our insurance policies has doubled over the past two years.
When did Toyota start making the 3.0 liter engine?
Toyota started the production of 3.0 liter 3VZ-FE engine in 1987 as the new engine for Toyota 4Runner. This engine was installed in other off-road Toyota models in the future. The engine is similar to its predecessor the 2VZ engine, but the more significant displacement is not the one difference.
What’s the life span of a Toyota 3.4L?
Fire Chicken, Vision10, firstgentacotuesday and 9 others like this. I have 218K on my 2002 V6 3.4 and aside froman engine sludge problem @ 44K I have had no other issues. Now I am playing a catch-up game though, as I have lapsed on some general maint things.
Which is better a Toyota 3.0L or 3.4L?
For those who only need to get from point A to point B and take their 4Runner off-road sparingly, the 3.0L will probably do just fine. Then there are you off-road enthusiasts. You need more power, more reliability, and better overall performance. And we’re all for that. (Like you can see here .)
When was the Toyota 4Runner dropped from sale in the UK?
In 1996 the 4Runner was dropped from sale in the UK, to be replaced by the Toyota Land Cruiser Prado, which was badged as the Toyota Land Cruiser Colorado.
What kind of suspension does the Toyota 4Runner have?
The new 4Runner used the independent front suspension that had been developed on the previous generation. The older style gear driven transfer case was phased out on the V6 models and they now had a chain driven case. The older gear driven case was retained on the 4-cylinder models.
Where are the gears on a Toyota 4Runner?
While it shares internals with the V6 diff, the gears are unique to the High Pinion due to the reverse cut, which puts the gears on the drive side of the teeth in the front axle. High pinion diffs are commonly found in 1990-1997 FJ-80 and FJZ-80 model Landcruisers that had the solid front axles.
When to replace the timing belt on a Toyota Tundra?
The 5VZ-FE engine was used for 3rd Generation 4runners, 1st Generation Tacoma’s, Early Tundras and T100’s. We not only show you how to replace the timing belt but we also show you how to replace all the associated parts; the water pump, both idler pulleys, the timing belt tensioner, thermostat, both cam shaft seals and the crank shaft seal.
Why does my Toyota 4Runner engine not start?
As of recently, it has become parked because it doesn’t want to fire right up. It cranks, but fuel doesn’t seem to be going through it. I have replaced from the fuel pump, filter, 3 relays that pertained to it, and still nothing!
How long does it take a 4Runner truck to start?
I have a 1992 4runner, what started off as a once in awhile starting problem in the morning (never when it is cold out, only when warmer weather) has turned into an every morning ordeal. The truck takes about 10-15 minutes to start,I turn the key and I must stomp on the gas the whole time and eventually it will start.
What kind of starter does a 1990 4Runner use?
I have a 1990 4runner, after going to destination, if i try to start,it only gets the solonoid click. wait a few hours and it starts right up. starter replaced 2 times new battery. mechanic says all electrical checked ok when it wouldnt start for him so he says it must be the starter again. 2 starters in less than 4oo miles. help!
How big are the tires on a Toyota 4Runner?
Here is a table of ring and pinion sizes for various gear ratios in the Toyota 8″ differential: (typical axle ratios for manual transmission equipped trucks, 28″ stock tires) . .
Is there a bearing rebuild kit for a Toyota 4Runner?
Bearing Rebuild Kit w/o Synchro Rings Toyota Pickup (2.4L) (Truck has an OE Replacement Input Shaft) Bearing Rebuild Kit with Synchro Rings 4Runner (2.4L) (Truck has Original Input Shaft) 20MM OD input brg, wire sync springs (OEM Syncro Rings)