When should I turn my high beams on?
When you cannot see farther than 200 feet using low-beams, you should switch to high-beams, unless:
- Another vehicle is within 200 feet and approaching you from the opposite direction.
- You are less than 200 feet behind another vehicle.
- Heavy rain, fog, or snow are present.
How do you tell if your high beams are on?
The high beam symbol is a blue symbol with five horizontal lines vertically stacked to the left of a shape that resembles a headlight. This will engage on the dashboard to notify you that your high beam lights are active.
Why does one of my low beams not work?
Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. The cause: A burned out bulb, or a problem with the high beam switch or relay. The fix: Replace the bulb, switch, or relay.
Why do high beam headlights work but low beams don’t?
Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams. 1. Headlight Bulbs This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t.
Why are the high beams not working on my Subaru?
Headlight Switch is Broken We don’t typically see this problem with Subaru models, but a broken headlight switch can be problematic. It may get stuck in position for the high beams or the switch could wear out and simply not turn the headlights on at all.
Is there a problem with my low beams?
I have a Gen 4. I have checked all of my fuses just to make sure they were all good. My low beams do not work at all. However, my high beams work fine. If i have the low beams turned on, there is nothing. When i turn on the high beams, they work fine. Heres the wierd part though.
How to fix a Toyota Camry headlight problem?
Toyota had 3 wires into one pin and it broke in the connector. I cut out the wires and ran them to a new ground point and my problem was fixed. I have daytime lights and low / high beams also fog lights. I have this same issue on a 2004 camry (Highs work, lows went out all of a sudden, Fogs work, parking lights work).