What size wrench Do I need to remove the oil drain plug?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
What tool do I need to remove oil plug?
The best tool to use to loosen the oil drain plug is the socket wrench. Get the proper socket that matches the oil drain plug size and use it to remove the stuck oil drain plug. Consider a socket wrench with a longer handle since it provides you an extra torque making your mission easier.
What size is Toyota Camry oil filter wrench?
64mm
Oil Filter Wrench for Toyota Camry/Tundra/RAV4 – Moker 64mm 14 Flute Oil Filter Wrench Tool for Toyota/Lexus/Scion 2.0 to 5.7L Engines，Also Fits Avalon,Tacoma,Highlander,Sienna,4-Runner and more. In stock soon.
What size socket fits oil drain plug?
GearWrench 16mm Magnetic Drain Plug Socket 3/8 Inch Drive 6 Point.
How long should you let oil drain?
The oil will warm up to about 100 degrees, which is not hot enough to burn you, but warm enough that it will flow easily. If the vehicle has been driven, let it sit for 20-30 minutes before draining the oil.
Are all oil filter wrenches the same?
Type of oil filter wrenches. Car engines don’t come with a one-size-fits-all oil filter. Each car has its own unique filter, depending on the manufacturer as well. That’s why you will never use one type of oil filter wrench for every kind of car.
Are all oil drain plugs the same?
All drain pans are not designed the same which is why different drain plugs are required for different vehicles. There is as much engineering going into the oil drain plug as any other part or system on the vehicle. Some vehicles have a reinforced drain plug hole and others do not.
How do you drain transmission fluid from a Toyota Camry?
Locate your 10 mm hex socket to remove the transmission drain plug. Remove the drain plug and drain out the ATF into a ready container. Screw the drain plug back in when draining is complete. An inexpensive socket set you can use on Japanese cars. Just Doing a Drain-and-Fill?
What to use to remove oil filter on Toyota Camry?
Using Motivx oil filter wrench to loosen tight filter. Using a 27mm socket and a 3/8″ drive ratchet, remove the oil filter with the MX2320 oil filter wrench.
Do you need tools to do an oil change on a Camry?
You may need to purchase some tools the first time you perform this oil change yourself, but they are a worthwhile investment that you can use over and over again throughout the life of your vehicle (s). Start by driving your Camry onto the plastic ramps or car lift, whichever one you have.
Where do you put the oil cap on a Toyota Camry?
Open the hood of the car and set the hood prop rod in place to keep it open. Locate the oil cap and remove it. Motivx Pro Tip: Set the oil cap on your hood latch, so that the hood will not close at the end of your oil change if you forget to put the cap back on.