How do you replace license plate light bulbs?

How do you replace license plate light bulbs?

License plate bulb Since a burned-out license plate light bulb can get you a ticket, replace it if needed. Unscrew the lens or release the locking tab. Twist the bulb socket a quarter turn and pull it out. Snap in a new bulb and reinstall.

How do you install new license plate lights?

Installing the bulb

1. Firstly, locate your number plate lights.
2. You should be able to remove the light cover with a Phillips head screwdriver.
3. Remove the old bulbs.
4. Insert the new bulb.
5. Place the cover back on and screw it in place.
6. Turn on your car and all lights to make sure your new light is working.

How do you change the license plate light on a 2009 Toyota Corolla?

Pull back the trunk lid carpeting and locate the black plastic license plate bulb socket. Reach in and rotate the socket 1/4 turn counter clockwise before pulling it straight out. Pull the old bulb straight out of the socket and push in a new # 168 bulb.

How do you fix a tag light?

1. Step 1: Remove the license plate light lens cover. Remove the hardware holding the license plate light lens cover in place.
2. Step 4: Install the replacement bulb. Place the new bulb into the bulb socket.
3. Step 1: Open the trunk.
4. Step 2: Pull back the trim carpet.
5. Step 3: Remove the license plate light bulb socket.

How do you remove the license plate light on a WRX?

License plate light

1. Insert a finger into the right side of the license plate light cover, then press once to the left and pull out to remove the cover.
2. Turn the bulb socket counterclockwise and pull out the socket.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the license plate light cover. See also: