How do you reset the maintenance required light on a 2008 Toyota Camry?
Reset Maintenance Light: Toyota Camry Instructions
- Put your key in the ignition and flip to position one.
- Push and hold the dashboard odometer button and turn the key to position two.
- Keep holding the odometer button until the maintenance light starts to flash.
- Let go of the odometer button and start your car.
How do you reset the oil maintenance light on a Toyota Highlander?
Press and hold the “Trip” stem button on the odometer. Continue to hold the “Trip” button while switching the ignition to “On” without starting the engine. For push button ignition models, press the button once. Release the “Trip” button when the trip meter is set to all zeros, and you’re done.
How do you reset the check engine light on a 2008 Toyota Tundra?
Turn off the vehicle and unplug the scan tool from the port. Wait one minute and then turn on the engine. Look at the instrument panel to verify that the check engine light has shut off.
Why is my maintenance light on?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.
How do you reset the oil light on a Toyota Highlander?
Press the ODO/TRIP BUTTON to display to ODO. Then Turn the IGNITION to OFF. Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “000000” is displayed. Then Turn the Ignition OFF. Then Turn the ENGINE ON to verify if the OIL LIGHT is reset. If fail Repeat the Procedure.
How to reset Toyota Highlander service maintenance indicator?
2008-2013 Highlander Maintenance Required Soon Reset STEP 1. Turn the Ignition ON. Don’t start the Engine. STEP 2. Press the ODO/TRIP BUTTON to display to TRIP A. STEP 3. Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “RESETTING MAINTENANCE DATA COMPLETED” is displayed. STEP 4
How to reset the oil maintenance required light?
Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Highlander: If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal Continue to hold down the ODOMETER/TRIP button until “000000” MILES appears on the display and the maintenance light turns off. Done!
How to reset the maintenance required light ~ 2006 Toyota?
On most Toyotas you simply: Turn the key to the on position. Determine that the odometer reading is displayed. Turn the key back off. Push and hold the reset button for the trip meters. While continuing to depress the reset button, turn the key back to the “on” position, but not so far as the “start” position.