How long does it take to replace a power window motor?
The average time to replace a power window motor is 2.1 hours. That averages out to roughly $120 to $150 in labor time plus the cost of the motor itself. This can usually bring the entire job to a total of anywhere from $200 to $300, depending on make and model.
What is the difference between a window motor and a window regulator?
The mechanism that moves the window up and down is called the window regulator. In some cars, the window motor comes with the window regulator as one unit (see the photo); in others, the window motor can be replaced separately. A window regulator doesn’t need any maintenance or adjustment.
How much does it cost to fix power windows?
The average time to replace a power window is around 2 hours, with the total labor cost being between $120 and $150, while the cost of the parts is between $80 and $150, making the total job of the window repair cost coming in around $20 and $300 in total.
How do you change the window motor on a Toyota?
Set the panel away from the work area. Disconnect the electric motor at the bottom of the window regulator by pulling its electrical adapter plug from both sides. The window motor has two or three bolts that hold it to the regulator, and a meshed gear set in the rear.
How to install a new power window motor?
Installing a New Power Window Motor 1 Slide the new motor and regulator back into place. Insert the power window motor and regulator back into the main service port in the door in exactly the opposite order that you removed them in when disassembling the door.
How can I replace the glass on my front door?
Alternatively, the door glass can be removed from the door and re-inserted without much difficulty. You can buy a regulator motor separate from the window regulator itself. But in my experience, for a few dollars more you can get a complete window regulator that includes a new motor.
How do you replace a power window regulator?
Replace the mounting bolts. Hold each component in the appropriate position as you return the mounting bolts that secure both the power window motor and the regulator. Thread each bolt in by hand first, then use a wrench to tighten them. If a bolt doesn’t thread it properly, remove it and try again to prevent cross-threading them.