Why is my Toyota Camry check engine light flashing?
If the check engine light in your Toyota Camry starts flashing, that means that the problem needs fast attention and your Toyota should be brought in urgently. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.
How do you turn off the check engine light on a Toyota Camry?
1. Using a Scan Tool
- Connect the scan tool to the onboard diagnostic connector. This is found under the steering column.
- Press the READ button on the scan tool, and look for any error codes.
- Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.
How many miles can a Toyota Camry last on a full tank?
The L trim level has a fuel tank that can hold 14.5 gallons while the rest of the trims have a 15.8-gallon fuel tank. As a result, the L trim level can go 420.5 miles in the city, 594.5 on the highway, and 493 combined miles on a full tank of gas.
How do you change the fuel tank on a Toyota Camry?
Disconnect fuel tank vent tube. Use a jack with a wood block under the fuel tank so the strap can be removed. Drop the fuel tank by removing the 14mm bolts that hold the fuel tank straps on. There are two fuel lines that need to be removed before the tank can come down, which are shown in Figure 9. The fuel tank can now be dropped.
What does the overfill valve on a Toyota Camry do?
This article applies to the Toyota Camry (1997-2001). The fuel tank overfill valve is often referred to as a ORVR or rollover valve. It allows purging of the fuel system during normal operation, but in case of an accident or a rollover, this valve prevents any further purging to reduce the chance of a fuel leak.
How do you jack up a Toyota Camry?
(Related Article: How to Jack Up Your Car – CamryForums.com) Loosen the 10mm bolt on the negative (black) battery terminal and set it aside. Make sure it doesn’t make contact with metal or it will short. Figure 2. Disconnecting battery. Wrap electrical tape on the battery connector to make sure no metal comes in contact with it.
Why does my Toyota Camry have a p0442 code?
The P0440 and P0442 codes can be caused by a large variety of issues; however, the most common is a defective check valve. Find out how to replace this simple part by following this DIY!