How to reset timing belt light on Toyota Hilux diesel?
The timing belt light displayed on the dash on a 2007 Toyota Hilux diesel is reset using the following manual procedure. Turn ignition on. Make sure the Odometer/Trip meter display shows odometer information. Turn ignition switch off. Press and hold the odometer/trip display button whilst turning ignition on.
How to reset the T Belt warning light?
T-BELT WARNING RESET COMPLETION a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch. b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.
How to reset timing belt on Toyota Landcruiser?
This is tutorial on how to reset timing belt on Toyota Dyna / Toyota Landcruiser (Same procedure for both). 1. T-BELT MODE DISPLAY b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds. c) Release the trip switch, then press the switch again within 5 seconds. d) The digital display should change to T-belt mode.
Can you change the T Belt on a Toyota Hilux?
You can verify my statement with any reputable Toyota agency. It is not to say that changing your T-belt at 100000km would do any harm.I still have many old farmers that insist to change their T-belt at 100000km as they did in the “OLD” days. I stil don’t think there is anything to worry about ,neither do i think the odometer is been tampered with.
How to reset timing belt light on Toyota Fortuner 2007?
Below is a quick guide on how to reset a timing belt light on Toyota fortuner 2007 model. Make sure all doors, hood and trunk are closed. Insert your your key, but don’t turn yet. Press and hold the ODO reset button in front of the cluster. Quickly turn on the ignition while you keep holding the ODO reset button for 10 seconds.
When does the T Belt Light Come On?
The T-Belt light will come on just past 150 000 km, whether you replaced the belt or not. 1. Switch ignition on and select “odo” 2. Switch ignition off
How to cancel the tbelt light on the kun16 Hilux?
The TBelt light on the KUN16 Toyota, Hilux become activated at 150,000kms there is two different dash board models, the standard and the large lcd display, listed below is the reset procedure to cancel the tbelt light after the timing belt job has been done. Press and hold the reset button.
Where do I find the information for a timing belt light reset?
Have you ever done the job on the car and realised where do i find the information to do the simple reset for a light?