Do I need to hook up power antenna wire?
Yes, these two wires should be connected together. This is what allows the radio to retract the antenna when it isn’t being used. Just because your wiring harness has a connection for this wire, it doesn’t necessarily mean that your car has this kind of motorized antenna.
How do you disconnect an antenna from a car radio?
Place a clean cloth around the antenna to protect the surface of the car and use a screwdriver to gently lift the rubber grommet from around the lip of the antenna. Pry the rubber piece loose and take it off of the antenna.
What is the blue wire on antenna adapter?
power antenna
The blue wire is for power antenna. This does not mean mechanical power antenna that goes up and down, this means amplified antenna.
What is the power antenna wire for?
When the ignition of the vehicle is turned off, the remote turn on wire stops transferring voltage and the amplifier turns off. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.
Where does antenna output wire go?
The power antenna lead from your deck goes to the green/yellow factory wire. The power antenna lead from your deck goes to the green/yellow factory wire.
Where does the blue wire go on antenna adapter?
The blue wire is attached to an antenna. The blue wire should be connected to the antenna turn on lead of your car stereo.
What do I connect the blue wire to?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
Do you wire your remote turn on to power antenna?
Do NOT wire your remote turn on to power antenna in newer vehicles: In older vehicles, wiring remote turn on to power antenna was very common and worked just fine because when the radio was on, the power antenna was up and working. But in newer vehicles, the power antenna may only be receiving power when the radio is in AM/FM mode.
When does the power antenna stop receiving power?
But in newer vehicles, the power antenna may only be receiving power when the radio is in AM/FM mode. If you switch to Aux input, CD, satellite radio, etc… the power antenna wire will stop receiving power and your amplifier will power down as a result.
How do you connect an antenna to a car?
You need to connect the antenna’s black wire to the White w/ Black stripe wire as that is the ground. That’s it for connections, if you need a switched power source in the back of the car, you now know where you can find one. Plug in your new antenna and give it a whirl.
How does an antenna on a radio work?
You need to hook the blue wire from your antenna to one of the radio switched sources, rather than the ACC switched source. The way the antenna works is, when power is on to only the red wire, the antenna retracts. When power is on to red AND blue, the antenna goes up.