How do I install steering wheel audio controls and wiring?
The steering wheel switches are easy to install ,, get under the switches and pull them out ,,, then unplug them ,, and install the new ones —see below as for the clock spring ,,, you have to remove the air bag,, remove the steering wheel ,, and the upper and lower steering column bezels.. see below
What can I do with a steering wheel control adapter?
I also love playing board games & RPGs, spending time with my family, and installing new audio systems for my friends. Video not available. One of the problems with replacing your factory radio with a new receiver, is that those handy audio controls built into the steering wheel won’t work anymore.
What should I do if my steering wheel does not work?
8) Make sure the steering wheel control buttons function correctly in the vehicle and enjoy your radio. So what if the led does not light up solid red? Check out troubleshooting section below.
How do you turn on the steering wheel?
1) Connect the Black wire of the ASWC (pin 6) to ground. You may use the same grounding point as the aftermarket radio. 2) Connect the Red wire of the ASWC (pin 12) to a 12 volt accessory wire, one that turns on and off with the ignition key.
How to install steering wheel controls to work with new?
1 To manually program the aftermarket radio, press and hold the Volume Up button on the steering wheel control until the led goes solid red, then release Volume Up. 2 At this point Eclipse is programmed. If you are using an Eclipse radio go to step 3. 3 Press and hold Volume Down for 5 seconds.
How to troubleshoot steering wheel control on Holden VY?
*Make sure the steering wheel interface harness plug matches the vehicles OEM radio plug. *Many customers think they can cut the plug from a CHVTVXA and will work in a Holden VY/VZ. NOTE: If the plug does not suit, the harness is not suited for the vehicle and will not work. ● Does the customer have a patch lead and is it correct?
Do you need audio adapter for steering wheel?
One of the problems with replacing your factory radio with a new receiver, is that those handy audio controls built into the steering wheel won’t work anymore. The way to solve this dilemma is to install an adapter for the steering wheel audio controls, which we offer at a discount when you buy a compatible stereo.
How does the aswc-1 steering wheel control module work?
The ASWC-1 includes a wire harness that you’ll connect to +12V, ground, and the SWC wires from your car (ideally via one of my harnesses). The module also connects to the “Wired Remote” input on your after-market HU. The ASWC-1 “translates” the signals from your car’s SWC buttons to the signals that your new HU needs to see.