How do you remove a Toyota bumper?
Instructions
- Remove three 10mm bolts from top edge of bumper cover.
- Remove 10mm bolts from under fender liner on both sides.
- Remove three 10mm bolts from underside of each side of the bumper cover.
- Unsnap bumper cover from a mount that’s attached to the front fender by grabbing the front and pulling forward on both sides.
How do you remove the rear bumper on a 5th generation 4Runner?
- Step 1: Remove rear bumper screws.
- Step 2: Remove rear wheel well screws on the splash guards.
- Step 3: Pop push tabs on the splash guards.
- Step 4: Set splash guards to side.
- Step 5: Remove screws on side mounting plastics.
- Step 6: Remove screws near the spare tire.
- Step 7: Plastic Pry Tools – Bumper tabs.
How do you install a 4Runner Valance?
TRD Off-Road Valance Swap 5th Gen 4Runner
- Tools Needed for Installation.
- STEP 1: REMOVE the clips on the back of the valence.
- STEP 2: SAND, WASH, & DRY THE FRONT OF THE VALENCE.
- STEP 3: REMOVE LICENSE PLATE AND HOLDER.
- STEP 4: PAINT THE VALENCE.
- STEP 5: Install the TOP OF THE valence to the bumper.
How much does it cost to replace a front bumper on a Toyota Camry?
The cost of a replacement Toyota Camry bumper cover varies depending on your vehicle’s year and model. OEM replacement parts will typically cost you anywhere between $160 to $1,100.
How do you take off a bumper cover?
Pull the plastic shield down out of the way if it doesn’t come off completely. Reach behind the bumper at each corner and you should find a bolt holding the corner of the bumper to the car. Remove these bolts. The bumper should come off.
What is a Satoshi grill?
“Satoshi” is Satoshi Miura. He is a Japanese business man and Hilux owner, who first modded a grill to replace the Toyota logo with the name plate. He is not a Toyota Motor Corporation designer or employee. Legend has it that this picture (linked to a Yotatech forum) started the global clamor for the grill.
How much does it cost to fix a 4Runner bumper?
Cost to Replace Toyota 4Runner Front Bumper
| Quantity | Low | High |
|---|---|---|
| 1 cover | $363.18 | $409.24 |
| 1 job | $48.82 | $55.01 |
| $14.45 | $16.29 | |
| $1,023.43 | $1,153.32 |
When to replace the front bumper on a Toyota 4Runner?
If either the front or rear bumper on your Toyota 4Runner has been damaged from a collision, you should replace that bumper for added safety. You can also replace the bumper with an aftermarket car kit if you feel like it. The following process applies for most 4Runner models made since 2003; the exact process can vary depending on the exact year.
Where can I buy a Toyota 4Runner bumper valance?
You can buy the front lower valance on eBay, or your local Toyota dealership. I bought two, one to play with in silver, and one in black. These bumper valances typically do not come with the bumper clips, so you need to purchase these separately. There are 17 total clips that hold the 4Runner front bumper valance in place.
How do you replace a rear bumper on a truck?
Pull the bumper out and away from the vehicle. Install the replacement rear bumper on the truck and apply the upper fasteners, the bottom fasteners and then the ones in the wheel wells. Reconnect the mud flaps. Removing the front wheels is not essential, but it can help give you more clearance when removing a front bumper’s fasteners.
How long does it take to install front bumper on Blackout 4Runner?
Finally, install the lower valance and reinstall the bumper. Here is the end result. This install may take 2-3 hours depending on your level of expertise in vinyl wrapping. It takes about 20 minutes to remove the front bumper, and probably 30-45 minutes dremeling in the holes, then another 20 minutes to reinstall the bumper.