Where are the timing marks on a Volvo S60?
And the barely visible timing marks on the crankshaft gear and engine block – the one on the engine block it’s not visible with the belt on, but can be felt by hand, it’s a small bump. There is also a timing bump on the crankshaft pulley (not visible in the photo). What is a timing belt anyways?
How much does it cost to replace timing belt on Volvo S60?
This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed. This range is based on the number and age of Volvo S60’s on the road. For a more accurate estimate based on your Volvo and location, use our Fair Price Estimator.
How often do timing belts need to be replaced?
Most timing belts will need to be replaced as part of regular maintenance every 60,000 to 100,000 miles, and most related problems are caused by not replacing it when you’re supposed to. If the timing belt is starting to go bad, the engine will run poorly and the check engine light will likely come on.
What does the timing belt do on a Volvo?
The timing belt races around these pulleys and gears keeping the valvetrain of your engine in check! The timing belt plays a critical role in your cooling system. Timing belts often drive the water pump for your Volvo’s engine. If any of these components fail, the damage can be catastrophic to your cylinder head and internal engine components.
What happens if the timing belt fails on a Volvo?
On some engines, if the timing belt fails, valves will be held open when they should not be and will be struck by the pistons, causing major damage to your engine. So you want to prevent it at all costs.
How often do I get the MVS Volvo newsletter?
The MVS Volvo Newsletter is a once-a-month email delivered to your email. It’s simple to unsubscribe at any time if you change your mind. Running Without A Catalytic Converter.
When do you replace timing belt on Volvo?
This bulletin contains information relating to the timing belt replacement interval for model year 1999 to model year 2015 Volvo vehicles. Continue on to the next page to see the interval listing base on year, engine and model beginning with model year 2015 and continuing down to model year 1999. Page 2 of 8 2014-01-15
What is the engine code of a Volvo?
Engine Code/MY Engine Version Replacement Mileage Vehicle and Regulatory Description Notes 59 B5254T2 120,000 miles / 10 years w tensioner & idler pulley 61 B5244S 105,000 miles / 10 years w tensioner 62 B5234T9 105,000 miles / 10 years w tensioner 63 B5244T7 105]
What does the timing belt on a car do?
The timing belt is the belt that controls the camshafts in your engine, opening and closing valves at just the right time for smooth operation. The timing belt has teeth that turn the camshaft in time with the crankshaft. Some cars and trucks use timing chains or gears, which are more durable.
What’s the maintenance schedule for a Volvo S60?
The Volvo S60 maintenance schedule includes 20 different types of services over the course of 150,000 miles. RepairPal generates both national and local fair price estimates for most service intervals. To get a local estimate for your specific model year, please select a service below.
When did the Volvo S60 P2 come out?
Help, Advice, Owners’ Discussion and DIY Tutorials on Volvo’s stylish, distinctive P2 platform cars sold as model years 2001-2007 (North American market year designations). 2004 Volvo S60 2.5T timing camshaft positions..
How do you zero out timing sprockets on a Volvo?
The standard tool used to align the slots has a built-in “stairstep” which places the slots in the proper offset. When preparing to install the cam sprockets, search this website for a description of how to zero out the VVT.
How do you set timing on a Volvo VVT?
1) Set timing to marks, remove belt, remove pulley, remove VVT center nut, replace camshaft seal. 2) install VVT with the pulley turned full-COUNTER CLOCKWISE (bolts far right in oval). Timing mark 1 tooth before timing cover. 3) Tighten VVT 120Nm. 4) Turn the pulley so that the timing mark aligns with timing cover (1 tooth) CLOCKWISE.
What does ECM 644a mean on Volvo VVT?
If you’re using VIDA it will show up as ECM 644A – Faulty position. If you are, and the hub isn’t setup correctly, no worries. Forget everything you read in the VADIS/VIDA, the directions are bullshit, simply put. Lock the cams in place and make sure the crank shaft marks are correct.
When to remove spark plugs from Volvo S60?
Before you go any further, you might want to remove all the spark plugs so that you can be sensative to any accidental valve/piston contact while working on it. If you feel any resistance, other than valve spring tension, while rotating a cam, don’t force it.
How to set timing mark 1 tooth before timing cover?
1) Set timing to marks, remove belt, remove pulley, remove VVT center nut, replace camshaft seal 2) install VVT with the pulley turned full-COUNTER CLOCKWISE (bolts far right in oval). Timing mark 1 tooth before timing cover
How to set up the valve timing on a 2000 Volvo S40?
How do I set up the valve timing on a 2000 S40 1.9 T. Problems: 1. How do I set up the valve timing on a 2000 S40 1.9 T. Problems: 1. When I set mark on oil pump cover between the two marks on crankshaft sprocket it appears to not be at top dead center.
What kind of timing belt does a Volvo use?
【 Flawless Fit 】 Exclusive Volvo timing belt tool kit, compatible with Volvo 4-cylinder, 5-cylinder, and 6-cylinder engines. Suitable for a wide range of Volvo models including 850, 960, C30, S40, S60, S70, S80, S90, V4, V50, V7, XC90 and V90.
What kind of timing tool do I need for Volvo S40?
Suitable for a wide range of Volvo models including 850, 960, C30, S40, S60, S70, S80, S90, V4, V50, V7, XC90 and V90. 【 Accurate Alignment 】 Fix leaking camshaft seal behind a VVT cam pulley. Get precise alignment even without a cam gear locking tool.
What happens if your timing belt goes bad?
If the timing belt is starting to go bad, the engine will run poorly and the check engine light will likely come on. If the belt breaks, the engine will stall immediately, and internal engine damage can occur.
What are the p80 and P2 timing belt intervals?
Late P80 and P2 official timing belt intervals from Volvo documents DID YOU KNOW? Volvo innovation is the reason kids get to ride in cars. That’s not to say that safety hasn’t served the brand well. Volvo was first to market with three-point seat belts, side-curtain airbags, and blind-spot monitoring.
What is the timing belt interval for skydiving?
Otto – If at first you don’t succeed…skydiving is not for you!!! Timing belt interval is at 105k so you are due. As you mentioned change the tensioner and idler as well, they are as likely to fail as the belt itself breaking with age. The water pump is not a high failure item, but while you’re in there you might as well put a new one on.
Can you check the variable valve timing pulley on a Volvo?
With these quick guide you can check if the Variable Valve Timing Pulley on your Volvo is playing up. This tutorial was done in a Volvo S40, but it is the same in any 4 or 5 cilinders engine in S80, V70, S60, XC70, XC90, S40, V40, C70 Volvo’s.
What causes hard shifting between gears in a Volvo?
Update TCM Software If you are experiencing hard shifting between gears, it could be caused by Transmission module software. This was a widespread problem in many Volvos from 2001 until 2007. The good news is that a simple software update performed by your Volvo dealer can often fix your hard shifting issues.
Which is better timing belt or timing chain?
The timing belt has teeth that turn the camshaft in time with the crankshaft. Some cars and trucks use timing chains or gears, which are more durable. But timing belts, made of rubber compound, are quieter and more efficient.
How do you replace a tensioner on a Volvo S60?
Now, route in the new tensioner up through the front passenger wheel well and set it into place. From up top, thread in the top tensioner bolt. Route the new belt onto the pulleys using the method shown in the below video. All other steps are the reverse of the removal steps indicated above.
Why is my Volvo S60 serpentine belt worn out?
Either serpentine belt wear which is identified by cracking belt rib, or t he bearing on the serpentine belt tensioner is worn out and noisy. Both of which can harm other parts on your Volvo if failure were to occur.
What can I do with an EWK Volvo timing tool?
【 Accurate Alignment 】 Fix leaking camshaft seal behind a VVT cam pulley. Get precise alignment even without a cam gear locking tool. Easily align camshafts and complete cam belt replacement, particularly needed when your cams have been moved by a cam gear lock.