Do you need a timing belt on a Toyota RAV4?

Do you need a timing belt on a Toyota RAV4?

All Toyota Rav4’s from 2001 and newer have timing chains and interference engines. All Toyota Rav4’s from 2000 and older have timing belts and non-interference engines. Scroll down for detailed information on your particular model year. Check Out Belt Or Chain For Other Makes And Models

How much does it cost to replace the drive belt on a Toyota RAV4?

Toyota RAV4 Serpentine/Drive Belt Replacement costs $128 on average. Following is a breakdown of the labor and parts estimates. What is a serpentine belt and how does it work? A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley.

How often do you need to replace timing belts on a Toyota?

Some Toyota engines have timing belts, some have timing chains. It pays to know what your engine has. Belts need to be replaced at normal intervals (usually every 90-100k on late model cars) or you will have hell to pay. Timing chains however are a different story and will generally last the lifetime of the engine.

What’s the difference between timing belts and timing chains?

The material used: timing belts are made of rubber and timing chains are made of metal. Timing chains were implemented before timing belts. Timing belts were introduced later on in the 1960s. Timing belts are quieter than timing chains because of their material. Timing belts are less expensive than timing chains because of their material.

What happens to the timing belt when it breaks?

The timing belt is responsible for controlling the camshafts in the engine and works to regulate the valves at precise intervals. This process depends on a functioning timing belt in order to operate properly. If the timing belt breaks, the best-case scenario is the car will stop operating.

When to replace timing belt on Toyota Sequoia?

Owners of Sequoias from 2008 and beyond with a 5.7 V8 have chains, as do 4.6 V8 Sequoias from 2010 to 2012. All Venzas manufactured from 2009 to present day have a chain, so don’t stress about the belt. If you own a 2000 to 2004 V6 Tundra get ready for a replacement by 60k miles.

When to replace timing belt on Toyota 4Runner?

4Runner Owners of V6 4Runners from 1990 to 2002 will need to replace their timing belt every 60k, while owners of V8 engines from 2003 to 2009 need to think about a belt replacement every 90k miles.

When to replace timing belt on Toyota Venza?

All Venzas manufactured from 2009 to the present-day have a chain, so don’t stress about the belt. If you own a 2000 to 2004 V6 Tundra get ready for a replacement by 60k miles. For a 4.7 V8 engine made between 2000 and 2009, prepare to replace the belt when the mileage reaches 90k miles.

When to replace timing belt on Toyota Tundra?

Tundra If you own a 2000 to 2004 V6 Tundra get ready for a replacement by 60k miles. For a 4.7 V8 engine made between 2000 and 2009, prepare to replace the belt when the mileage reaches 90k miles.

How big is the pulley set on a Toyota RAV4?

Tighten the pulley set bolt to 40 ft. lbs. (54 Nm). WARNING If any binding is felt when adjusting the timing belt tension by turning the crankshaft, STOP turning the engine, because the pistons may be hitting the valves.

How do you remove timing belt from Cam?

Remove the timing belt from the camshaft timing pulley. Hold the camshaft sprocket with a spanner wrench and remove the mounting bolt. Remove the camshaft pulley. Remove the crankshaft pulley bolt and remove the crankshaft pulley. Remove the No. 1 timing belt cover. Remove the timing belt guide and the timing belt.

When do I need to replace my timing belt?

How do I Know When to Replace my Timing Belt? If your Toyota Rav4 runs on a timing belt, then you will need to replace it every 60,000 miles to 90,000 miles. It is a bit higher maintenance than the timing chain in this sense but it is crucial to not go over the 60,000-90,000 range.

Can you change the timing belt on a Camry?

The camry engine is VERY similar to the rav engine. The camry is not like the rav though, as it was sold with a 6 cylinder engine, so changing the timing belt on a camry is a joy, the rav is a pain as there is no room anywhere… You dont need any special tools to change the belt, its not hard other than rusted or siezed bolts, and tight spaces.

Can you tell if a car has a timing belt or chain?

Yes, you read that right, it all depends on the year. All new vehicles come with an owner’s manual that will tell you whether or not your vehicle has a timing belt or chain because they may vary from year to year or by the manufacturer.

Can a torn cambelt cause engine damage?

One thing every driver dreads hearing is that their cambelt (also known as a timing belt) has torn or snapped. It can cause a lot of engine damage that can be very expensive, or even impossible, to fix. So, to avoid getting yourself in hot water, it’s important not to put off changing your cambelt when your car needs it.

How much does it cost to replace a cambelt?

If you need to get your cambelt replaced, you could find yourself paying anything between £200 and £1,000, depending on the factors we’ve listed above. However, typical cambelt replacement costs are in the region of £300 to £400. The most substantial part of your bill will generally be labour costs.

Can you change the water pump and cambelt at the same time?

Often, garages will recommend that you change your car’s water pump at the same time as the cambelt. This is because both parts are situated in the same area of the car and often wear out at the same time. Changing them both together can save you from doubling up on the timing belt change cost.

How do you change the idle speed on a Toyota Rav 4?

Detach the throttle body from the engine with a socket wrench and then separate the idle speed-control valve from the throttle body. Place the control valve on a towel or old cloth and coat the valve and throttle body with throttle body cleaner by spraying the cleaner on the inside and outside of the valve.

How do you clean the throttle body on a Toyota Rav 4?

Place the control valve on a towel or old cloth and coat the valve and throttle body with throttle body cleaner by spraying the cleaner on the inside and outside of the valve. Clean the valve and throttle body by wiping it dry with a towel to remove any debris or oil.

Why is my rav 4 losing so much speed?

The problem is often a sticky or gummed-up speed-control valve. Cleaning the ISC valve will greatly increase any loss in rpm’s and get your Rav 4 running more efficiently. Remove the air cleaner from the top of the Toyota Rav 4 engine with an open-end wrench and set it off to the side.