How do I set my alarm on my watch?

How do I set my alarm on my watch?

How to set up alarms on a digital watch

1. Locate the ‘Mode’ button on your watch and press it repeatedly until the alarm setting mode appears on the display.
2. Press the ‘Split/Reset’ button, or the ‘Start/ Stop’ button.
3. Press ‘Light’to confirm the hour and change the flashing digits to set the minutes.

How do you use a sonata digital watch?

PAIRING THE STRIDE PRO WATCH

1. Open the SONATA STRIDE Watch app on your phone and follow the instructions to pair your phone.
2. Remove the spacer from the crown near 3H, rotate the crown to adjust the time and then press it to start the watch.
3. Wear your STRIDE Pro watch on your wrist.
4. Your watch is paired and calibrated.

How do I set the time on my Sonata Super Fibre digital watch?

Setting Sequence:

1. In normal time readout, press B three times to get normal setting mode.
2. Press D once; Minute flashing, Press C to advance.
3. Press D once: Hour flashing, Press C to Advance (A on display = AM, P = PM)
4. Press D once: Date flashing.
5. Press D once: Month flashing, press C to advance.

How do you set a digital watch with two buttons?

How do you set a 2 button digital watch?

1. Step 1: Month. Press set (bottom) button till it matches the watch in the photo.
2. Step 2: Day. Press set (bottom) button till it matches the watch in the photo.
3. Step 3: Hour. Press set (bottom) button till it matches the watch in the photo.
4. Step 4: Minute.
5. Step 5: Finish.

How do I change the day on my digital watch?

To change settings, you’ll first need to switch your watch to Time Mode, which will allow you to adjust things like the time, date, day of the week, and more. Once you’re in Time Mode, you’ll use a button to move through and modify settings. When it’s set, you’re ready to use your watch.

How do I change from 24 hour to 12 hour in sonata?

1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.. Press MODE when done.
5. Press and hold ADJUST, then press START/STOP to turn chime on/off.

How do you turn off the alarm on a Lorus digital watch?

With each depression of button “C” in the alarm display, the alarm is engaged and disengaged alternately. The alarm rings at the designated time for 20 seconds and stop. To stop it manually, depress button “A”, “B”, “C” or “D”.

How do you set the date on a digital watch?

To set the time and date on your digital watch, press the “Mode” button repeatedly to access the “Time and Date” display. Press the button multiple times until the “Time” digits begin to flash, noting that on some models you need to hold the button down to access this feature.

How do I set my watch to the exact time?

Set the reference time:

1. Unscrew the crown and pull it out to position 2.
2. Make sure that the bezel is in the home position. The triangle is pointing at 12 o’clock.
3. Turn the crown to set the reference time. The hours are read from the bezel, the minutes from the dial as normal.

How do you set an alarm on a digital watch?

You can easily set the alarm on your digital watch to wake you up, remind you of an important appointment or let you know when to take dinner out of the oven. It takes just a few seconds to set your watch’s alarm. Locate the “Mode” button on the digital wrist watch.

How do you set a 4 button digital watch?

There are 5–6 main ways. Usually you use the mode button to select the time. Then you hold the mode button down til something blinks. Then usually the right bottom button will change that thing. usually up. When it gets where you want it, press mode again and something else will blink. When you get to where nothing blinks, then it is done.

How do you change the time on a digital watch?

If it’s been a while since you’ve had to set your digital watch, you may not remember the procedure. To change settings, you’ll first need to switch your watch to Time Mode, which will allow you to adjust things like the time, date, day of the week, and more. Once you’re in Time Mode, you’ll use a button to move through and modify settings.

Where is the reset button on a watch?

The top left button resets the stopwatch (really called a chronograph), and holding it down for a few seconds in time, timer, or alarm mode will cause the watch to enter setting mode. Things will flash. Use the bottom right button to adjust those things.