How do you set the timing belt on a Daewoo Matiz?
Install the bolts.
- Tighten the timing belt front lower cover bolts (a) to 9-12 N•m (80-106 lb-in).
- Tighten the oil level gauge guide tube bolt (b) to 9-12 N•m (80-106 lb-in).
- Tighten the timing belt front upper cover bolts (c) to 9-12 N. m (80-106 lb-in).
Does a Daewoo Matiz have a Cambelt?
The Matiz is not a ‘GM’ engine (although it is only in the sense that GM now own Daewoo). Its a little 800cc 3-cylinder unit. You are supposed to check the belt every 2years/20k and replace every 6 years/60k.
How do you put a new belt on a Matiz?
I put the new belt on and tightened up the lower cover, then tightened most of the bolts on the upper cover, then used my power bar to push the lower cover in under the upper one. Started up, lovely and quiet. A good run confirms it’s all running well.
How do you change timing belt on Daewoo Matiz?
good trick I heard of is to get a new belt and cut halfway through the width of the old one then cut along it’s length a bit ,grab it with pliers and rip it off leaving , half the width of the belt still on. Snug up the new one next to it then cut the rest of the old belt off and push the new one home. Most tensioners can be slacked off.
When to replace Matiz water pump at cam belt change?
Hi All regarding replacement of the Matiz water pump at cam belt change. Pump replacement at this time is best described as “preventative maintenance”. The bearings in the tension roller and pump are sealed for life type and as such will have a finite life. These two bearings contribute to maintaining cam belt tension.
Do you have to change timing belt with water pump?
Never presume when it comes to timing belts, if you dont have proof that its been done get it to a good mechanics and have him change it along with the water pump. adelcrow writes… along with the water pump.