When to replace timing belt on 1997 Chrysler?
On 1997-2000 models, inspect at 60,000 mile intervals & replace as required, if belt was satisfactory at 60,000 miles, replace at 90,000 miles. On 2001-08 models, inspect at 60,000 mile intervals & replace as required, if belt was satisfactory replace at 100,000 miles.
What happens if the crankshaft sensor is not working?
It might be hard to get your engine started without the fuel it needs or without proper timing. If the crankshaft sensor has failed completely, and isn’t sending a signal to the ECU at all, then the computer won’t send any fuel to the injectors. This will leave you unable to start the car.
How often should a timing belt be replaced?
{61} On 2007 & prior years, every 105,000 miles. On 2008-09 models, normal service, replace every 102,000 miles; severe service, replace every 105,000 miles. On 2010 miles, replace every 120,000 miles. {62} On 2005-07, normal service, replace every 102,000 miles; severe service, replace every 105,000 miles. On 2008-10 models, every 102,000 miles.
What causes a CMP sensor to break in an engine?
It’s not uncommon for a CMP sensor internal circuitry to develop an electrical open. This is usually caused by the sensor being exposed to engine high operating temperatures. High temperatures can break a wire. The broken wire may still make contact while the engine is cool.
Where is the timing chain on a Chrysler 2.7?
The 2.7 engine has both the timing chain and the water pump on the inside of the engine. To access it, it is required to remove the timing chain cover, which also acts as an engine mount, mounting the engine to the frame of the car.
When do you change the timing belt on an Acura?
Acuras have one of the longest intervals for timing belt replacement. Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced.
How do you remove a timing belt from an engine?
Remove the bolts or screws holding the timing cover in place. Remove this cover off the engine. Some engines have a two-piece timing cover. Remove any components or accessory drive belts that interfere with removing the timing belt cover.
How often do you need to change timing belt?
Available for a few dollars at any auto parts store, you’ll likely need to change yours every 90,000 to 120,000 miles (140,000 to 190,000 km), depending on your engine. Gather the information about your vehicle. You will need to know the make, model, and year model of the vehicle, as well as the engine type and size.
Can a harmonic balancer be removed from a timing belt?
Determine if the harmonic balancer pulley needs to be removed to remove the timing belt cover. Often, the cover saddles over the end of the crankshaft, and this pulley will not allow you to remove the cover without first removing it.