Do you need alignment after replacing axle?
Yes. Anytime you disassemble and reassemble any parts of the suspension or connected components, you will need an alignment afterwards.
How long does replacing an axle take?
On the 2006 Navigator, if a professional mechanic is replacing the axle(s), it is assumed to take about 1 hour to replace one axle (i.e., one side) whether it is the rear axle or the front axle.
Can you change an axle yourself?
Most people will take their cars into the shop when it’s time for a new CV axle, but it’s a job that you can absolutely do yourself with some time, patience, and plenty of elbow grease. Don’t be intimidated, but do spend the time to research your own vehicle to make sure you’re comfortable with the work.
Do you need a Subaru front axle seal replacement?
Subaru front axle seal replacement! No need for more leaks, the media has plenty.. With all the leaks out there from newest tech devices, Liveleaks and various other media stories, let’s try to keep our Subarus from doing the same, i.e leaking all over the place.
How do you remove an axle from a Subaru?
Having the knuckle separated from the strut will now allow the axle to be removed from the hub. You may find that you need to apply downward pressure on the lower control to allow the axle to free itself. Once it is free find a safe place for the outer boot to rest. Axle getting ready to be removed as the knuckle is undone.
How to replace front CV axle on Subaru Outback?
Open balljoint pinch gap with screwdriver, insert balljoint into hub, and replace bolt. Jack up transverse link until stabilizer link is aligned, and replace nut & bolt. Slide under the car, pull inner axle fully onto diff shaft, and replace the spring pin. Torque nuts/bolts to spec (37, 22, and 159 ft-lbs on my 2001 H6).
What kind of axle do you need for a Subaru Outback?
IMO a brand-new axle is overkill for a 100K car…but I also don’t want to take ANY chances with poor fit, missing pieces, or vibration…so I got the OEM reman. If you want cheaper, others on these forums have recommended MWE remanufactured Suby axles, or aftermarket Cardone axles, or aftermarket GCE axles.