Can a bad pickup coil cause no spark?
A bad pickup coil may mean a lack of engine spark because the spark plugs are not receiving the proper information to fire correctly. The fuel injectors also fail to fire, which may lead to car not starting.
How do I test my ignition coil without spark?
Remove a plug wire and insert an old spark plug or a spark plug tester into the end of the wire (the plug boot). Place the spark plug on a metal surface on the engine, or ground the spark plug tester to the engine. Then crank the engine to check for a spark. No spark indicates an ignition problem.
How do I fix no spark?
First, Confirm Your Engine Has No Spark:
- Disable the fuel system by removing the fuel pump fuse or relay.
- Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine.
- Finally, Have someone crank the engine and watch for spark.
Why is there no spark from the ignition coil?
Its like the ignition coil is not collapsing to send the spark energy to the spark plugs. How can you check the pickup coil to see if the timing events are happening in order to make and break the ground on the ignition coil in order to induce a spark on the secondary side, so that spark energy is sent to the spark plugs?
What happens when you replace the coil wire on an engine?
You can replace the secondary coil wire on an engine that uses one with an equal length of vacuum hose and the engine will start and run. The powerful spark will travel down the hollow hose to the distributor cap, but the engine will stall under any load because of the weakened spark.
How does a spark get to the spark plug?
Primary windings create a magnetic field that when collapsed across secondary windings, create high voltage. This high voltage is required to overcome the greatest KV requirement in the secondary (normally the spark plug gap) this high voltage is transmitted from the coil to the spark plugs through a coil wire, dist cap, rotor and spark plug wires.
How to know if your engine has no spark?
First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.