How do I reset the oil change indicator?
•To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure. •Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to ON/RUN position (do not start the engine). •Fully depress the accelerator pedal, slowly, six times within 10 seconds.
When to reset maintenance light Toyota after an oil change?
The computer system starts tracking the mileage after every reset and the light will come on after you drive 5,000 miles. The light comes on after 5,000 miles. (Photo Source: nairaland) When you change the oil or have the vehicle serviced, you will need to turn off maintenance light Toyota so that it can again start counting for 5,000 miles.
How do you turn off the oil change light?
Press and hold the stem for 10 seconds, or until the icon begins flashing. Release the stem and hold “select” again for five more seconds. The oil change light should disappear until the next time a change is due. If it doesn’t, then repeat these steps.
How to reset a GMC oil change light?
The following instructions cover the model year 2005, as well as older GMC products and Chevrolet vehicles without a vehicle information center (VIC). To reset the oil change light, follow these two steps: Slip behind the wheel and close all the doors. Insert the key in the ignition and turn the key to the accessory position.
Can you reset oil change light without changing oil?
Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine.
How do I reset oil light after oil change?
Hold the button down until the “Oil” icon or word starts to flash, or the indicator lights show some other sign of resetting. Some cars will flash the word “Reset,” or display the numeral “100” to show that 100 percent of oil life remains after the oil change. Turn the ignition off, wait a few moments, and then start the engine.
How do I reset oil life light?
- Turn the ignition to the first position. Do not start the engine.
- Press the ” Trip ” stem to toggle it to show ” Engine Oil Life “.
- Press and hold the ” Trip ” stem for about 10 seconds until the display starts blinking.
- twist the ” Trip ” step to choose the ” Reset ” option.
- this time for 5 seconds.
How to reset the oil light after an oil change?
How to reset change oil light? Locate your vehicle’s oil change reset button. Within your vehicle’s dashboard and around the gauge, locate a switch, button, or stick with a “reset” name. Change the odometer’s display mode to show total mileage. Press and hold the reset button, followed by turning the key. Confirm that you’ve reset the change oil light successfully.