Why does my cigar lighter not work?
When a cigarette lighter socket stops working or seems to malfunction, there are a few things that can go wrong: The cigarette lighter socket is blown – This just means that there’s no power getting to the socket at all. The fuse could be blown, or there could be another problem with the wiring.
Where is the fuse for the cigar lighter?
It will be located in the interior fuse box, the exact location, fuse size and type is identified on the fuse box cover label or in the owners manual. The fuse for the cigarette lighter may be listed as: 12v Power point. 12v Outlet.
What is the fuse for cigarette lighter called?
In most cases, cigarette lighter circuits use 15 amp fuses, but you can check the fuse box in your vehicle to be sure.
Why did my torch lighter stop working?
If this does not work, the burner may be clogged; clean it with a blast of compressed air. If neither of these methods works, you may be low on butane or may have an air bubble in the lighter’s tank. The only way to definitively solve either problem is by emptying the lighter and refilling it with fresh butane.
Why is my lighter not working?
1. Make sure that there is no debris, dirt or lint clogging or blocking the lighter’s operation. Even a small amount of debris can stop a lighter from functioning correctly. If you find obstruction of any kind, remove it and then attempt to light your lighter.
Why isn’t the power outlet in my car working?
If you determine that what you’re plugging in isn’t the problem, check to see if the fuse for the car’s power outlet has blown. You may need a fuse puller to check it, though some vehicle manufacturers thoughtfully include one in the fuse panel. If the fuse is bad, replace it with one of the same amperage.
Which fuse is for cigarette lighter in Astra?
The fuse you are looking for is fuse 29 in the rear fuse box (REC), behind the left hand side panel of the boot. It is a 15A (blue) one.
Why are my car outlets not working?
What to do if your cigarette lighter fuse is not working?
Before testing, turn the ignition on, power outlets will only be powered when the ignition is switched on, this prevents your car battery draining away. This is a lot like the board game “Operation” – if you touch the outer ring with the test light, the fuse will blow, so keep that in mind.
Why does my OBDII cigar lighter not work?
I noticed that my primary cigar lighter is listed as “Cigar lighter/OBDII” in the Owners Manual. I proceeded to check the lighter and it doesn’t work. I then pulled the fuse box cover and checked the fuse and it’s good. Even replaced it with a known good fuse, but still no power to the Cigar lighter or the OBDII port.
What does no light mean on cigarette lighter?
No light or volts indicates a broken wire between the fuse and the lighter socket or a broken ground wire from the chassis to the socket. In this test we’re only concerned with the power side of the circuit.
How do you test a car cigarette lighter?
At first, you need to test the lighter with the help of a circuit tester. Place the clip end of the test light to the outer frame of the socket. Hold it on if clipping seems difficult. Next, use the longer end of the tester and try to touch the back of the socket.