How do you reset the oil light on a Subaru Forester?
Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
How do you reset the maintenance light on a 2014 Subaru Forester?
Oil Change Light Reset Subaru Forester 2014 2015
- Turn the ignition to the “RUN” position.
- Pull the i/Set switch towards you to display selection screen.
- Use the up or down arrows to highlight “MAINTENANCE” and pull the i/Set switch towards you.
- Choose maintenance item to reset and pull i/Set switch towards you.
When to reset the oil light on a Subaru Forester?
2017-2018 Subaru Forester Change Oil Light Maintenance Minder Reset. Time needed: 7 minutes. When maintenance service is due, a Maintenance minder will appear on the display. The maintenance minder information display must be reset after performed the maintenance service or change the engine oil on your vehicle.
How much oil is in a Subaru Forester?
Subaru had its settlement of a lawsuit approved by a US Court in August 2016.The US complainants experienced over 1.5 quarts of oil consumed between change intervals with low-level dash lights coming on.
When to change the oil in a Subaru?
Mileage-based intervals: If you regularly drive your Subaru, we recommend having the oil changed based on miles driven because of wear due to heat and friction during engine operation. Three facts about engine oil consumption. FACT 1: All engines consume (or burn) some oil as they operate.
How to remove an old oil filter in a Subaru Forester?
Twist off the old oil filter by turning it in the counterclockwise direction. If you have trouble loosening the old oil filter, I recommend using a Lisle 63600 oil filter wrench. I’ve had mine for many years and it has made removing stubborn oil filters much easier.