Can a Honda Accord crank but no start?

I decided to research it and was following a tutorial online where a lot of people tried and it worked: It basically instructs you to bridge pin 4 and 9 on the ODB2 connector, I did just that and saw a little spark – I immediately removed the bridge and tried to start the car to no avail, it cranks well – just wont start up.

Why does my Honda Civic have no start?

This is video on crank no start issues on a Honda. A crank no start can be caused by many things including a bad PGM-FI (Programmed Fuel Injection) Main Relay. If the main relay goes bad, it can cut off the fuel injectors and the fuel pump. The exact vehicle in this video is a 2000 Honda Civic LX Sedan. Enjoy!

What’s the name of the car that won’t start?

Have a 2004 honda accord replaced starter car still won’t start. Lights and radio come on but no sound of it trying to Was this answer helpful? Russ will be eternally grateful.

What should I do if my car wont start?

After insisting the starter is bad even AutoZone has tested so many times and confirmed it’s good. I bought new starter, and guess what! Car started right away!!! My car is working now.

What to do if your Honda Accord won’t start?

A crank with no start — if the problem truly only began after you jumped the DLC. Not a difficult diagnoses, just simplify the process; scan codes, check immobilizer circuit, disarm (unlock doors) immobilizer if possible. Sounds like an immobilizer issue. You can go into the immobilizer module and verify the key is recognized, in data.

Is the Honda Accord crank but no motor vehicle?

After days of researching and getting help from the awesome folks here and other forums, I have finally came to a conclusion, which yeilds success.

What kind of motor does an Accord EX K24 have?

I have a 2006 Accord EX K24 motor 2.4L 4cyl that will crank all day long but will not start, bought it off of a friend thinking it was a sensor, when she had it it developed a long crank then eventually start now it wont start at all, I have replaced Crankshaft position sensor and both Camshaft position sensors, all 4 coils and plugs.

How big is the crank bolt on a Honda?

You are dealing with a 19mm bolt, which is called the “Crank Bolt”. This holds the harmonic balancer to the crank shaft. It is threaded opposite of the rotation of the engine, so this bastard is tighter than….well. It will take a load of leverage to break it loose. Once broken for the first time, you will hear a very loud pop.

What do you need to take harmonic balancer off Honda?

You will need (2) 1/2″ breaker bars, several extensions to get this out of the wheel well, a jack stand, and some bricks. Once you get the bolt off, keep a very close eye on where the “Woodruff Key” is, as it will fall when taking off the harmonic balancer. This tiny, nickel sized, piece keeps the balancer and crank shaft spinning together.

Navigation