Can a code 13 be thrown from an engine stall?
An EJ22 service bulletin issued by Subaru noted that a code 13 can be thrown from a simple engine stall “for any reason” (some users have reported both codes 11 and 13 can result from stalls). It was recommended to clear the code 13 to see if it returns without an engine stall, before replacing the angle sensor.
What happens when a code 22 is thrown?
A code 22 will cause a significant loss of engine power. When the knock code is thrown, the ECU retards timing into a safe zone in order to prevent any knocking from happening while the sensor is down. This will causing the engine to bog. Code 24
What is the flashing code on a faullt?
P0089 (flashing code 151) shared the tank pressure failure (for pump pressure supply is too large) P0090 (flashing code 247) SCV drive system open, + B short circuit or shorted to ground • Depending on the open / short situations, there may be an engine stall and / or launch Machine channeling gas.
What does abnormal voltage input from throttle sensor do?
Abnormal voltage input entered from throttle sensor Sets TPS output to a fixed voltage; injection duration determined by idle switch, AFM, and RPM only 32 Oxygen sensor Oxygen sensor inoperative 33 Vehicle speed sensor Abnormal voltage input entered from speed sensor
An EJ22 service bulletin issued by Subaru noted that a code 13 can be thrown from a simple engine stall “for any reason” (some users have reported both codes 11 and 13 can result from stalls). It was recommended to clear the code 13 to see if it returns without an engine stall, before replacing the angle sensor.
A code 22 will cause a significant loss of engine power. When the knock code is thrown, the ECU retards timing into a safe zone in order to prevent any knocking from happening while the sensor is down. This will causing the engine to bog. Code 24
Abnormal voltage input entered from throttle sensor Sets TPS output to a fixed voltage; injection duration determined by idle switch, AFM, and RPM only 32 Oxygen sensor Oxygen sensor inoperative 33 Vehicle speed sensor Abnormal voltage input entered from speed sensor
Can a DTC be cleared by the stalk switch?
DTC (s) can no longer be cleared using the vehicles instrument cluster digital display and stalk switch control.