Why is my security Indicator light flashing on my Subaru?
That’s the Security Indicator Light, and it’s blinking, it’s telling you that the car’s security sytem is armed. When the car is locked and off, the Security Indicator Light will blink steadily. It will trigger shortly after the engine has been turned off and the key has been removed from the ignition.
How to reset Subaru alarm?
Turn the key on-off 3 times within 5 seconds and the alarm will go off and you can start the car. It’s simple!…You can also use the same steps to restore the function.
- Sit in the driver’s seat and shut all doors and the rear gate.
- Hold down the UNLOCK side of the power door locking switch.
What does the flashing security light mean on a Subaru?
The doors lock and the remote is working fine and the security system still beeps when i lock/unlock it. Everything seems to be working fine. Thanks for you input. It means you car has a security system with the immobilizer chip. Subaru Keyless Entry, Security Alarm, Immobilizer Key, Remote Start Systems. Most years and models
Is the security light on when the car is off?
No, the security light will always flash when the car is off and the key is out. It is flashing red with the car off. This has not been the case prior.
What does security light rapidly blinking all the time mean?
Enter your ride HERE to be a part of this month’s Outback of the Month Challenge! Pretty simple; parked the car, removed the key, and the security light, along with the word SECURITY, began rapidly blinking. Restarted the car, turned it off, same thing.
What’s the flashing security light on my Forester?
In my 09, when you activate the security system, it will have a rapid flash for about 30 seconds or so,then it will slow down and have a steady flash. The security light will also flash, if the security is not activated by the fob. I have a 99 Forester (just got it) I have to be sitting in the driver’s seat to activate the remote lock / unlock.