Did Subaru ever make a V8?
Subaru BRZ with 362-hp, 2.4-liter V8 is the best thing you’ll hear today.
What engine will replace the EJ20?
The well-known EJ20 2.0-liter boxer turbo is out, replaced by a new FA20 2.0-liter boxer turbo, that reportedly pumps out 320hp and 325 lb-ft of torque.
Are there any problems with the Subaru EJ20 2.0L?
The 2.0L EJ20 was replaced by the new naturally-aspirated version in the Subaru FB engine family – the FB20 engine. 1. Knocking noise from EJ20 Engine. The engine has a problem in the 4th cylinder. This cylinder is hottest; the cooling is worse in this place of the engine.
What kind of engine does a Subaru Forester have?
I have a 1999 Subaru Forester with an automatic transmission and a 2.5 Liter Motor. It has poor acceleration and rough shifting I started to notice ‘hesitation’ on take off. It just slowly appeared.
What to do when replacing a Subaru Forester engine?
1) Any sohc 2.5 will drop in place of any other. 2) Check if you need an EGR. 3) Use your intake, wiring harness, crossover pipe, and peripherals. 4) Either inspect or re-use your left cam and crank pulley. FHI liked to change the cam and crank sensor firing points.
How many horsepower does a Subaru EJ have?
Naturally aspirated and turbocharged versions are available, ranging from 96 to 320 hp (72 to 239 kW; 97 to 324 PS). These engines are commonly used in light aircraft, kit cars and engine swaps into air-cooled Volkswagens, and are also popular as a swap into copy wasserboxer engined Volkswagen T3/Vanagon .
The 2.0L EJ20 was replaced by the new naturally-aspirated version in the Subaru FB engine family – the FB20 engine. 1. Knocking noise from EJ20 Engine. The engine has a problem in the 4th cylinder. This cylinder is hottest; the cooling is worse in this place of the engine.
What kind of compression ratio does Subaru EJ205 have?
Subaru EJ205 engine for Forester had a compression ratio 8.5 and used Mitsubishi TF035 turbocharger. EJ205 engine for 2000-2007 Impreza WRX was equipped with variable valve timing system AVCS on intake camshafts.
How big is the intake valve on a Subaru EJ20?
Diameter of intake valves is 36 mm, exhaust valves is 32 mm, valve stem diameter is 6 mm. Camshafts are set in motion with the help of timing belt. The recommended interval of replacement of timing belt for EJ20 is for each 60,000 miles of mileage (100,000 km). The first version of this engine was called EJ20E and it was installed on Subaru Legacy.
1) Any sohc 2.5 will drop in place of any other. 2) Check if you need an EGR. 3) Use your intake, wiring harness, crossover pipe, and peripherals. 4) Either inspect or re-use your left cam and crank pulley. FHI liked to change the cam and crank sensor firing points.