How does the tire pressure warning light work?

If the tire pressure in one or more of your tires is low, the tire pressure warning light will illuminate on your dashboard. An indirect TPMS uses wheel speed sensors that are part of your anti-lock braking. These sensors gauge how fast your tires are revolving to determine the relative size of your tires.

What does the air pressure warning light mean?

The sensors are monitoring the air tire pressure data and sending this information to a centralized control module. If the tire pressure in one or more of your tires is low, the tire pressure warning light will illuminate on your dashboard.

What does it mean when your TPMS warning light is on?

So check your tires carefully. If your vehicle has a TPMS, it’s probably monitoring the pressure in your spare tire. Therefore, if you get a low tire pressure warning light, and if you’ve checked all four tires that are touching the ground, than you might need to put some air in the spare.

What’s the best way to reset a low tire pressure light?

Probably the easiest method is to drive about 10 miles at 50 mph. Use the cruise control to keep the speed constant. Some vehicles reset the sensors at higher speeds than others. Shut off the car.

What to do when the tire pressure light is flashing?

For most cars, all you need to do are the following: Put your vehicle key in the ignition to turn the battery on. Push the TPMS reset button until you see a flashing tire pressure light, which usually appears after approximately three seconds. Start your vehicle. Drive for about 20 to 25 minutes. Turn your car’s ignition off.

Is the tyre pressure warning light on your dash?

If the tire pressure in one or more of your tires is low, the tire pressure warning light will illuminate on your dashboard . An indirect TPMS uses wheel speed sensors that are part of your anti-lock braking. These sensors gauge how fast your tires are revolving to determine the relative size of your tires.

What does the tyre pressure warning light actually mean?

The purpose of the TPMS ( Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.

Why does the tire pressure light stay on?

When your tire pressure monitoring system (TPMS) warning light comes on, flashes repeatedly, and then turns off, this indicates a malfunction with the vehicle’s TPMS system. If the TPMS comes on and stays on, it means your tire has a dangerously low level of air pressure.

When to check tire pressure with the TPMS?

While every time you start the car and the pressure light turns on and stays lighted, this means the TPMS is not functioning properly. However, before consulting the mechanic regarding this issue, do check the tire pressure. If the tire pressure is fine, the TPMS needs to be repaired. 2. Extreme Cold Weather

Is it normal to forget to evaluate the spare tire pressure?

It is normal to forget to evaluate the pressure of the spare tire. It happens when you are adjusting the pressure of active tires. You can perform the following actions to diagnose a fault. In our case, the TPMS light is ON, but tires are fine. a) You can reset the system as you observe what happens.

What does a low tire pressure warning light mean?

When the TPMS warning light comes ON and flashes ON for one second and OFF for three seconds, this indicates a problem with the vehicle’s computer and can be corrected only by the dealership service center. When the TPMS warning light comes ON and stays ON, this indicates a low tire pressure condition in one or more tires.

Why is my TPMS warning light on my spare tire?

Don’t Forget The Spare. If your vehicle has a TPMS, it’s probably monitoring the pressure in your spare tire. Therefore, if you get a low tire pressure warning light, and if you’ve checked all four tires that are touching the ground, than you might need to put some air in the spare.

When does the TPMS warning light go out?

The TPMS warning light will illuminate when a tire is low and should eventually go out after a tire has been inflated to its recommended pressure according to the vehicle’s door placard, according to ATEQ TPMS. After starting a vehicle, a TPMS icon will turn on for a few seconds.

What should I do if my tire pressure light is still on?

If the tire pressure light is still on after filling the tires, the light may need to be reset. The process for this varies greatly by car make and model. Sometimes you can find the exact procedure in the owner’s manual or by searching your vehicle online.

What to do if your TPMS warning light is still on?

If you’ve checked all your tires (including the spare) and the tire warning light is still illuminated, reset your tire pressure monitoring systems. Some models require the TPMS to be reset every time pressure is added. Instructions for how to reset your tire warning light vary from model to model.

Can a tyre pressure warning light fail the MOT?

Tyre Pressure Warning Light and the MOT. A faulty tyre pressure monitoring system will usually result in an MOT failure. Regulations from 1st January 2015 require that any car manufactured from 2012 onwards that is displaying the TPMS light on the dashboard will fail the MOT test.

How does a tire pressure monitoring system work?

A direct TPMS uses sensors to monitor the pressure within each tire. The sensors are monitoring the air tire pressure data and sending this information to a centralized control module. If the tire pressure in one or more of your tires is low, the tire pressure warning light will illuminate on your dashboard.

When to use the TPMS light on your tires?

The purpose of the TPMS is to notify the driver whenever one or more tires has low air pressure in them. For instance, let’s say you’re driving over a speed bump too quickly. It could knock some of the air out of your tires. If the tire pressure gets too low, then a TPMS light will illuminate on the dashboard to notify you of this.

How do you reset the tire pressure warning light?

Press the reset button and hold it for three seconds. The system will reset when the TPMS warning light blinks three times. Turn the ignition to the “Off” position after waiting five seconds to allow the TPMS to learn the new tire pressure readings.

Why is my check tire pressure light on?

Here are some reasons why your check tire light is on: Cold weather can cause the pressure in your tires to decrease. That’s because cold air is more dense, and occupies less space than warm air. If you live in a cold climate you will often have to add some air to your tires in the winter, and drain a little when the temperatures warm up.

How to reset a stuck low tire pressure ( TPMS ) light?

1. Drive at 50 MPH for 10 Miles The easiest method is to drive about 10 miles at 50 mph. If you can, use the cruise control feature to keep the speed constant. Some vehicles reset their sensors at higher speeds than others. When you’re done, park and shut off the car. The next time you start it, the light should go off. 2.

Why does my tire pressure warning light keep coming on?

If you’ve added air but the air pressure warning light stays on, there’s a problem with your Tire Pressure Monitoring System or you have a slow leak. Assuming there is no leak in your tire, a lit TPMS warning light indicates a problem with a tire pressure sensor.

Where is the low tire pressure light but tires are fine?

As a result, this turns on the low tire pressure light but tires are fine, for a while but disappear once the tires are warmed. However, if it doesn’t turn off, measure the pressure of tires. 3. Recent Tire Replacement As discussed earlier, the TPMS is located on the rim of the tire.

Navigation