How do I turn off the security on my Subaru Outback?
When you can’t use a remote to turn off the system: open the door with a key or try to start the car and the horn will start to honk. Turn the key on-off 3 times within 5 seconds and the alarm will go off and you can start the car.
How do I put my Subaru into valet mode?
Subaru Outback: Valet mode To enter the valet mode, change the setting of your vehicle’s alarm system for deactivation mode. Refer to “Activating and deactivating the alarm system” F2- 16. The security indicator light will continue to flash once every 3 seconds indicating that the system is in the valet mode.
How to deactivate the alarm system on a Subaru Outback?
Subaru Outback: Activating and deactivating the alarm system 1 Disarm the alarm system. Refer to “Disarming the system” F2-18. 2 Sit in the driver’s seat and shut all doors (and the rear gate (Outback)). 3 Turn the ignition switch to the “ON” position.
What does the VDC warning light on a Subaru Outback mean?
The flashing of the VDC warning light is an indication that the system is attempting to stabilize the vehicle. This may include skid suppression or traction control. Name: Subaru Outback security indicator warning light.
What do you do when the warning light goes off on a Subaru?
If driving, stop as soon as safely possible and leave the engine to idle until the warning light goes off. Once the warning light has gone off, the transmission fluid is cool enoigh for you to continue your journey. If the AT OIL TEMP is flashing, it indicates that there’s a fault with the transmission control system.
When does the seatbelt warning light turn off?
Apply the parking brake and turn the ignition switch to the “ON” position. The following lights illuminate: (The seatbelt warning light turns off only when the driver fastens the seatbelt.) (The seatbelt warning light turns off only when the front seat passenger fastens the seatbelt.)
The flashing of the VDC warning light is an indication that the system is attempting to stabilize the vehicle. This may include skid suppression or traction control. Name: Subaru Outback security indicator warning light.
What does the Mil light on a Subaru Outback mean?
Description: The check engine warning light / malfunction indicator lamp (MIL) may either come on constantly or flash. ▷ Constantly: This indicates an emissions control malfunction. You can continue driving, but may notice poor fuel economy and engine performance. Have vehicle checked as soon as possible.
If driving, stop as soon as safely possible and leave the engine to idle until the warning light goes off. Once the warning light has gone off, the transmission fluid is cool enoigh for you to continue your journey. If the AT OIL TEMP is flashing, it indicates that there’s a fault with the transmission control system.
How do I Turn Off the seatbelt warning light?
This permits checking the operation of the bulbs. Apply the parking brake and turn the ignition switch to the “ON” position. The following lights illuminate: (The seatbelt warning light turns off only when the driver fastens the seatbelt.)