What causes a belt to come off?
Belt coming off: Pulley misalignment, belt misalignment on pulley, defective tensioner, or bearing wear in tensioner, idler or driven accessories.
How do you remove a belt from a power steering pulley?
Use a pry bar or a long end wrench to apply pressure to the pump. This will loosen the belt even more so you can slide the belt off the pulleys. Step 9: Remove the old belt. Once the tension pulley and the power steering pulley have been loosened, you should be able to slip the old belt off rather easily. Step 10: Place new belt on the pulleys.
What to do if your power steering belt is leaking?
Ensure the car is shut off before doing any work on the power steering belt. An obvious leak is a serious compromise to the safety and efficiency of your car’s power steering system. If you notice a slick, dark brown fluid under your car and it smells like burning oil, it might not be oil.
What to do if you have a power steering problem?
What to do: give your power steering pump pulley a thorough inspection, or have a professional mechanic take a look. If you have a buddy who’s willing to help, safely jack your car up and have one person turn the wheel while the others inspects the power steering belt.
Can a slipping belt cause a steering problem?
A slipping belt can cause serious issues since your power steering will intermittently not function causing strange steering problems. Replacing the power steering belt requires a certain level of mechanical tools and skills. If you are uncertain then this is a job best left to professionals.
How to adjust and replace a power steering drive belt?
Ease the belt onto the pulley. Never try to lever off the old belt, you may damage the pulley. Slacken the adjuster and pivot bolts, and push the pump inwards by the cast front plate until the belt is slack enough to ease off. Do not push against any other part of the pump or pipework, or you may damage it. Remove the old belt.
What to do if your power steering belt is too slack?
If the belt was too slack, increase the tension by levering the pump outwards with a strong screwdriver or flat bar. Lever against the cast front end of the pump body, just behind the drive-belt pulley — not against any other part of the body or pipework, which are easily damaged.
A slipping belt can cause serious issues since your power steering will intermittently not function causing strange steering problems. Replacing the power steering belt requires a certain level of mechanical tools and skills. If you are uncertain then this is a job best left to professionals.
What to do: give your power steering pump pulley a thorough inspection, or have a professional mechanic take a look. If you have a buddy who’s willing to help, safely jack your car up and have one person turn the wheel while the others inspects the power steering belt.