What does the trouble code p1114 stand for?
A P1114 trouble code is related to a low voltage reading from either the engine coolant temperature or intake air temperature sensor that relays temperatures to the engine computer.
What does DTC p0117 mean on an engine?
P0117 is a diagnostic trouble code (DTC) for “Engine Coolant Temperature (ECT) Sensor Circuit Low Output Problem”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
Where is the trouble code on a Saturn?
These are listed in numerical order for easy searching. When retrieving Saturn trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
What are the symptoms of the p0117 OBD-II code?
ECT sensor input to the ECM went to more than 0.14 Volts or 140°C (284°F) indicating a short circuit in sensor or wiring. The ECT sensor or wiring is shorted. What are the symptoms of the P0117 code?
These are listed in numerical order for easy searching. When retrieving Saturn trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
How much does it cost to diagnose p0171 Ford code?
The cost of diagnosing the P0171 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0171 FORD code detected? – Fuel injection system does not operate properly.
What does the p0171 code on my air conditioner mean?
If the P0171 is combined with the P0174 code, it’s very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter.
What causes a p0117 ECT signal low input?
Potential causes of the P0117 code include: 1 Bad ECT sensor 2 Short to ground on ECT signal circuit 3 Faulty or damaged connectors 4 Wiring harness damaged 5 Loose terminals at ECT or PCM 6 POSSIBLY an overheated engine 7 Bad PCM More