How do you remove air from a slave cylinder?
To remove the air from your clutch system you need to push or pull the air down through the fluid line to the bleeder valve on the slave cylinder. To keep things clean you should attach a tube to the nipple on the bleeder valve. If you use a clear tube it can be easy to see when all the air has exited the system.
How do you bleed air from a slave cylinder?
Adding the new parts introduces air into the system, which creates a soft or non-existent clutch action when you press the pedal. To bleed air from the hydraulic clutch system, you must release air from the slave cylinder.
What is the clutch assembly in a Saturn Ion?
by Frank Whittemore. The clutch assembly in a Saturn Ion is hydraulic system and consists of a master cylinder, the hydraulic line and the slave cylinder. When the clutch pedal is depressed, the master cylinder is actuated. This transmits force through the hydraulic line to the slave cylinder, which disengages the clutch.
What happens when the slave cylinder is released?
This transmits force through the hydraulic line to the slave cylinder, which disengages the clutch. When the clutch pedal is released, the hydraulic pressure returns to its original state and the clutch engages.
Do you test the clutch after you Bleed the slave cylinder?
Finally, it is time to test the clutch once the slave cylinder has been bled. Start your car and test the clutch to verify its functioning. If you used the floor jack to raise the vehicle for the bleeding process, you can lower the vehicle before testing the clutch.
by Frank Whittemore. The clutch assembly in a Saturn Ion is hydraulic system and consists of a master cylinder, the hydraulic line and the slave cylinder. When the clutch pedal is depressed, the master cylinder is actuated. This transmits force through the hydraulic line to the slave cylinder, which disengages the clutch.
This transmits force through the hydraulic line to the slave cylinder, which disengages the clutch. When the clutch pedal is released, the hydraulic pressure returns to its original state and the clutch engages.
Where is the bleeder valve on a slave cylinder?
Locate the bleeder valve on the slave cylinder. Loosen the bleeder valve with the box end wrench until you notice fluid dripping out of the valve. Place one end of the plastic tubing on the nipple of the bleeder valve. Place the other end in the glass jar.