How do you change the battery on an ion 2?
Replacing the battery in your Ion-2 involves removing the terminals. When you reconnect the terminals, your radio presets are likely to be cleared out. In some Ion-2s, you may need to re-enter a security code to get your radio to work again.
How can I get my Ion 2 radio to work again?
In some Ion-2s, you may need to re-enter a security code to get your radio to work again. Check for this code in your owners manual – it will usually be either a sticker or small card in the booklet. If you can’t find it, call Saturn and they will give you the code for free.
When to replace battery in Saturn Ion 2?
Although some batteries last much longer, most batteries begin breaking down chemically after four years, so you could experience dimmer headlights and other negative effects before you have a dead battery in your Ion-2 that you need to replace. Replacing the battery in your Ion-2 involves removing the terminals.
How to deal with a transmission shifting problem?
B. Think Simple: When dealing with transmission shifting problems, always start with the simple things first. Many diesel automatics use vacuum to modulate and control shifting. That being the case, it stands to reason you should always begin by checking over your vacuum system.
How to adjust shift cable on a golf cart?
The shift cable will function perfectly now. You can adjust the shift cable in the Yamaha G20 Gas by removing the adjustment nuts by slackening the jam nuts. Get the cables out by moving the shift lever back and forth. Now replace the cable and keep adjusting the cable-ending position at the transaxle end.
How to adjust shift cable on a Yamaha G2?
With the Yamaha G2, the shift cable adjustment is not a very difficult one. You have to access the transaxle on the rear of the cart and pull out the bracket where the cables are attached. You can now replace the cable.
Where are the shift solenoids located in a car?
There are two or more shift solenoids inside your transmission. The solenoids are typically integrated into the transmission valve body. If one or more of them fails, you’ll likely notice a handful of car problems.
How do you replace a shift lever spring?
1. Remove the original shift lever by simply pushing the pivot pin out of the bowl. A small punch or simi- lar tool may be used. Gently tap it upward with a hammer and the pin will come up and out.