How do you remove air conditioning from a Saturn?
Remove the air-dam retainer and remove the air dam. For Saturns equipped with air conditioning: Remove the condenser bolts and slide the condenser down to remove the upper mounting tabs from the radiator. Set the condenser away from the radiator and support it on the motor. Remove the radiator baffles from the left and rights sides.
How does a / C work on a Saturn?
For A/C equipped Saturns: Reinstall the left and right side air baffles. Slide the condenser to hook into the upper mounting tabs on the radiator. Reinstall the condenser bolts and tighten. Reinstall the air dam and press-in retainers to the radiator. Align the cooling-fan shroud retainer clips to the radiator.
What’s the best way to cool a Saturn?
Take your time, do it right the first time and reap the benefits by keeping your wallet fat. Park the Saturn on a flat, level paved or concrete surface. Allow the engine to cool. Release the hood latch and apply the parking brake. Place a wheel chock behind one rear tire. Lift the hood and remove the radiator cap.
How do you remove a radiator from a car?
Lift the hood and remove the radiator cap. Lift one side of the car by the rocker panel and place a floor jack under the front frame rail. Repeat this procedure for the other side to elevate the front axle. Place a drain bucket under the radiator and open the drain valve.
How do you remove a radiator on a Saturn?
Close the drain valve on the radiator and remove the drain bucket. Lower the Saturn back to the ground. Remove the upper-radiator inlet hose in the same fashion you removed the lower one. Slide the clamp away with the channel locks and pry the hose off of the radiator.
How to air condition a Saturn with air conditioning?
For Saturns equipped with air conditioning: Remove the condenser bolts and slide the condenser down to remove the upper mounting tabs from the radiator. Set the condenser away from the radiator and support it on the motor. Remove the radiator baffles from the left and rights sides. (Non A/C-equipped Saturns can skip this step.)
How do you drain a radiator in a car?
Place a wheel chock behind one rear tire. Lift the hood and remove the radiator cap. Lift one side of the car by the rocker panel and place a floor jack under the front frame rail. Repeat this procedure for the other side to elevate the front axle. Place a drain bucket under the radiator and open the drain valve.
How do you get antifreeze out of a radiator?
Squeeze the clamp on the bottom radiator hose with the channel locks and slide it backward onto the hose away from the radiator. Pry the hose off with the screwdriver and allow the antifreeze to drain into the bucket.
Is it necessary to replace radiator in Saturn Ion?
It’s important to keep the radiator in your Saturn Ion in good shape, as a damaged radiator can cause overheating and destroy the engine. If you’ve got some mechanical skills, you can save some money by replacing the radiator yourself.
Where is the battery on a Saturn Ion?
Remove the battery from the Saturn Ion. Locate the plug on the underside of the radiator and drain the engine coolant into a resealable container. Loosen the bolts that hold the power steering reservoir to the fan shroud and tilt the reservoir towards the rear of the vehicle.
It’s important to keep the radiator in your Saturn Ion in good shape, as a damaged radiator can cause overheating and destroy the engine. If you’ve got some mechanical skills, you can save some money by replacing the radiator yourself.
Remove the battery from the Saturn Ion. Locate the plug on the underside of the radiator and drain the engine coolant into a resealable container. Loosen the bolts that hold the power steering reservoir to the fan shroud and tilt the reservoir towards the rear of the vehicle.
How do you remove a fan from a radiator?
Unfasten the bolts holding the fan shroud, and take off the fan shroud. Detach the wiring harness and remove the hose clamp on the lower radiator. unhook the hose and the lower transaxle cooler line from the radiator and cap the end of the line to prevent contamination.
How do you remove a radiator tank retainer?
Disconnect the electrical connectors on the cooling fan and slide the connectors from the retainer. Remove the fan electrical harness from the fan shroud’s tabs. Take off the cooler line on the upper transaxle on the radiator end tank and unsnap the tank retainer on the front end.