How do I take off my door panel?
Look for a small, triangular cover piece at the top edge of the door panel, where the window connects to it. Wedge your fingers into the edge of the cover piece and gently pull against it to remove it. If you can’t get the cover off with your hands, wedge a screwdriver into the edge of it and pry it off.
How do you remove window regulator from car?
Remove the door panel to gain access to the window regulator. Use a Phillips screwdriver to the remove (5) screws that retain the door panel (see pic below). The (2) screws that attach the door pull strap to the door are behind covers that you can remove by gently prying them off (from the underside) with a flat-blade screwdriver.
Can a door glass guide be replaced with a window regulator?
If you have to replace the window regulator or the regulator motor, you can leave the door glass and guide in place, with the door glass taped in place to prevent it from sliding down into the door (see the video below). Alternatively, the door glass can be removed from the door and re-inserted without much difficulty.
How can I replace the glass on my front door?
Alternatively, the door glass can be removed from the door and re-inserted without much difficulty. You can buy a regulator motor separate from the window regulator itself. But in my experience, for a few dollars more you can get a complete window regulator that includes a new motor.
How do you remove power window control panel?
Remove the power window control panel by gently prying up the front of the panel them pulling it forward. Use a Phillips screwdriver to the remove screws that retain the wiring harness to the control panel. On some newer model Town Cars (ours was a 1997) these connectors “snap-in” and thus there are no screws to remove.
Do you need to replace the window regulator?
The window regulator does not come off the window panel that we just removed. You will need to replace the whole window regulator panel and the window regulator together. Reinstall the door panel in reverse order. Make sure to reconnect the electrical connectors including mirror switch, window switch, side mirror, door handle.
How much does it cost to replace a Hyundai window regulator?
Hyundai window regulator is broken and doesn’t allow the window to go up or down. Depending on the model a new Hyundai window regulator can cost as little as $50. Remove the door panel.
What’s the torque on a Hyundai window regulator?
Torque them to 10 Nm should be enough. The window regulator panel in this Hyundai is held in place with several 10 mm bolts. Rember to lower the glass in order to access the two bolts that secure the glass.