How do you disable OnStar?
Ask OnStar Customer Service to cancel your subscription. If you want to stop using OnStar, dial 1-888-4-ONSTAR (1-888-466-7827), or press the blue button on your OnStar system to contact Customer Service. The agent you speak with will be able to guide you through the process of canceling your service.
Is there a way to disable the OnStar module?
As soon as you can see and access the OnStar module box, you can stop pulling the panel out of place. Step 6: Remove the three connectors on the OnStar module box. Press the tab down on the cord end that connects with the module box port and pull the connector right out.
What should I do if my OnStar light goes off?
Pressing the OnStar button beneath the rearview mirror should now result in dead air. If the OnStar light was previously on, it should now be off. You should also check your other vehicle systems to make sure that none of them were affected. Turn on all lights, radios, and other electric features.
What do you need to know about OnStar?
OnStar is a subscription-based service that provides remote vehicle diagnostics, communications, security, and other features for vehicles. The company is a subsidiary of General Motors, and is popular for capabilities like turn-by-turn navigation, hands-free calling, and as a surveillance device when your car or truck is left unattended.
Where are the screws to deactivate OnStar?
If your vehicle does not have a cargo net in the trunk, the four screws you need to remove should be located in the corners of your trunk. After removing the screws, pull the sill plate up to lift it out of the trunk. Set it and the screws aside in a safe spot while you continue working.
Why do I need to disable my OnStar account?
While many people find the OnStar service to be very useful, there are some reasons you may wish to disable it, including a change in budget or its vulnerability to hacking. Step 1: Visit the Onstar website. Visit the Onstar website and select the option to Manage Account.
How do you remove the OnStar module from a vehicle?
1. Remove Onstar Module from vehicle. 2. Remove the 6 T10 screws from the bottom of the Onstar Module. 3. Pull up on the main board to separate it from the antenna board. 4. Remove the Male/Male connector that connects the main board to the antenna board. 5. Drop the main board back in without the Male/Male connector and reinstall the screws. 6.
How do you remove an OnStar antenna from a car?
Remove the nut and any screws holding the antenna in place. Pull up the antenna from the roof of the car. Some plugs will come up with it, so unplug them to remove the fin completely. Re-attach the headliner and replace all the screws to finish the job. After removing the OnStar antenna, there will be a small hole in the roof of your truck.
If your vehicle does not have a cargo net in the trunk, the four screws you need to remove should be located in the corners of your trunk. After removing the screws, pull the sill plate up to lift it out of the trunk. Set it and the screws aside in a safe spot while you continue working.