Can you use a coat hanger to unlock your car?
by Giselle Diamond. If you have locked your car keys in the car or misplaced them and find yourself locked out, you can use a coat hanger to unlock your car. It requires a little patience and a relaxed mental attitude, but it’s not difficult to do.
How do you open a car door with a coat hanger?
If the post pops up, the door will be unlocked and you can open it. You may need to try multiple times if the hanger slips off of the post. Press the unlock button if you can reach it. Snake the bent coat hanger through the window crack and hit the unlock button with the tip of the wire.
Where is the pin on a coat hanger?
Straighten out the coat hanger but leave the “hook” end intact. Insert the hanger under the rubber molding on the left side of the passenger side window, and attempt to locate a pin inside the car door’s frame. The pin is located toward the center of the door in most vehicles. Tug lightly and pull up on the hanger when you find the pin.
How to open a locked car with keys?
Locked Keys In Car? 13 Ways To Open A Locked Car With Keys Inside. 1 1. Check Doors. Sometimes not all the doors on your car will lock. It is a scary idea, but it happens. Most drivers are most acutely aware of the 2 2. Check The Trunk. 3 3. Remote Unlock Service. 4 4. String Or Small Diameter Rope. 5 5. Coat Hanger.
What do I need to lock my keys in my car?
This may even work with a push button door lock system as well depending on how steady your hand is and how accurate your aim is. For this to work you need to have the coat hanger again or a long, thin, sturdy rod. You’ll also need a wooden wedge like a doorstop.
How can I hook a coat hanger to a lock post?
Use a pair of pliers to fold the end of the straightened coat hanger until the span of the check mark is tight enough to hook the post. Many door lock posts have a groove or ridge that will make it easier to grip when using a coat hanger for this purpose.
Can you break a car window with a coat hanger?
If the window is open slightly, you will not need to pry it out at all. However, if the window is shut, you will need to slide a narrow wedge into the gap between the window and door frame and pry the window out away from the vehicle. Be extremely careful doing this, as applying too much pressure will break the window.