How do you know if you need sway bar bushings?
If your sway bar bushings are going bad, you will likely feel it when you turn — the car’s handling will feel sluggish or less stable. Knocking noise: Typically, the first sign of a bad sway bar bushing is a thumping or knocking sound when you go over bumps. The noise may also be heard when the vehicle takes a corner.
What do you lubricate sway bar bushings with?
Place the bushings back on the sway bar until they reach the stop on the sway bar. Turn the bushings so the split edge of the bushings face the front of the vehicle. Keeping this in view, should I lubricate new sway bar bushings? No grease. The rubber bushing deforms to allow the swaybar to rotate, stretching like a rubber band and snapping back.
How does rubber sway bar affect car handling?
Once that happens, the rubber sway bar bushing loses its grip on the sway bar which reduces its effectiveness. Not only does this allow the sway bar to flop around and hit other suspension parts, but it also causes an increase in vehicle body roll in turns and diminished handling.
Which is better rubber or polyurethane sway bar bushing?
A polyurethane sway bar bushing has a much better grip on the bar and will keep that grip over time. As your vehicle turns, the polyurethane bushing doesn’t give like a rubber bushing. This results in decreased body roll and more consistent tire to road contact. Because a Sway Bar doesn’t hold any vehicle weight NVH isn’t really an issue here.
How to replace the rear sway / stabilizer bar?
Clean sway/stabilizer bar bushing contact surface. Grease bushing mounting surface. Split bushing open and mount on bar. Push mount bracket on new bushing. Screw in and tighten mount bracket bolts. The 2.5 minute video below will show you step-by-step how to replace the rear sway/stabilizer bar bushing on a Toyota or Lexus sedan.
What are the signs of a bad sway bar?
Symptoms of Sway Bar Problems. Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns.
Should I replace the sway bar?
Since the sway bar in your car rotates each and every time that you drive around a bend or take a turn, it tends to put a tremendous amount of stress on your sway bar links. This can put you in a position where you might have no choice but to replace them if they go bad on you.
How do you change sway bars?
Step 1: Engage the parking brake. Step 2: Loosen the lug nuts. Step 3: Raise your vehicle. Step 4. Secure the vehicle. Step 5: Remove the tire. Step 6: Locate the sway bar link to be replaced. Step 7: Remove the lug nuts. Step 8: Apply pressure on the sway bar. Step 9: Make sure the new sway bar link matches the old one.
Which sway bar bushing part number?
Jeep Cherokee Sway Bar BushingPart Number: 52001144 BUSHING-SWAY BAR Vehicle Specific Fits the following Jeep Cherokee Years: 1984-1990 | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L