What does error code et mean on Samsung dryer?
Samsung Dryer Error Code = Et. Error Condition = Control board failure. Check and or Repair = Remove power to the dryer for 10 minutes to try and reset the control board. If the error code comes back after restoring the power to your dryer then replace the electronic control board.
What does Samsung he or he error code mean?
Samsung HE or hE Error Code = Heating error (electric dryer) See if a house circuit breaker for the dryer is tripped; the dryer won’t heat if a leg of the 240 volt power supply is off. Unplug the dryer and check the wiring connections on the heating element.
What to do if you have a do Erro code on your dryer?
If you still have the do erro code, remove power to the dryer and check for a loose wiring connection in the door switch. If loose then reconnect the wire harness. Replace the harness if you find damage. If wiring is okay then replace the door switch.
Why is Chase host unable to read reference number file?
Host couldn’t read reference number file within specified time. Transaction open flag has been set to “Y” within prior 3 minutes. It is caused by multiple concurrent transactions (i.e. batch processing) received by the Chase host when the “Controller Flag” is set to OFF. The resolution is to change the Controller Flag to ON.
What is the Econet fault code for vsodu?
VSODU (Variable Speed Outdoor Unit Control – EcoNet control board) fault code is what will be displayed on the VSODU EcoNet error code at Control Center VSODU Fault Code Description Possible Resolution(s) EV2 Drive LED Code A900_O Inverter Fault – Identity Fault
What does it mean when it says er, e or E0?
Error codes: ER, E or E0 January 09, 2019 09:38 When ER or EO is displayed, it means there is a communication failure between the Firmness Control system’s base unit (pump) and the remote. To fix this issue, please watch the video below.
What does ER mean on firmness control system?
When ER or EO is displayed, it means there is a communication failure between the Firmness Control system’s base unit (pump) and the remote. To fix this issue, please watch the video below.