How much does a Saab door lock unit cost?

How much does a Saab door lock unit cost?

When you hit the central locking button on the remote, the affected door often won’t lock (or won’t unlock if it was already locked). The issue tends to start out intermittent and then worsen with time. A new unit is currently around £140 (without labour), but they can be obtained second hand on ebay for around £30.

Why is my Saab 9-3 door lock not working?

The central locking door lock mechanisms on Saab 9-3s (and 9-5s) are known to occasionally malfunction/stop working. When you hit the central locking button on the remote, the affected door often won’t lock (or won’t unlock if it was already locked). The issue tends to start out intermittent and then worsen with time.

What does dead lock do on a Saab planet?

And if in addition you specify our advanced car alarm, you can be sure of one thing: your Saab will always be on its guard. Dead locking means the doors cannot be unlocked from inside, you can still unlock the doors using the key.

Where is the door card on a Saab 9-3?

To access the door locking mechanism, we need to remove the door card and disconnect some cabling etc. There are two screws holding the door card in place, both located under the inner handle. You need to carefully prise the handle apart to access them: The two screws have Torx heads, you’ll need a long driver to reach the middle one.

How do you remove a Saab door lock unit?

The electrical connector is a bit odd. First you need to unclip the black shroud from the cable and move it up and out. Then, the reddish/purple tab should be levered up, which will move the connector back until you can slide it off. You should now be able to remove the unit.

The central locking door lock mechanisms on Saab 9-3s (and 9-5s) are known to occasionally malfunction/stop working. When you hit the central locking button on the remote, the affected door often won’t lock (or won’t unlock if it was already locked). The issue tends to start out intermittent and then worsen with time.

To access the door locking mechanism, we need to remove the door card and disconnect some cabling etc. There are two screws holding the door card in place, both located under the inner handle. You need to carefully prise the handle apart to access them: The two screws have Torx heads, you’ll need a long driver to reach the middle one.

How to unlock your stuck rear seat in seconds?

It’s important you have to have it in the right spot when you’re pulling up and if you try a bunch of times and it doesn’t work, try making a new tool. What happens is the metal gets softer when you bend it so a fresh piece of wire may do the trick Hope this helps you unlock your seat! If it did like and comment 🙂 Loading…