How do you reset the service light on a Saab 9 3?
Reset service light indicator Saab 9-3
- Switch On the ignition.
- Depress & release the CLEAR button.
- Reset by push the CLEAR button & hold down button for at least eight seconds, until ”SERVICE” warning light appears on the display and a chime sounds.
How to reset the service light on a Saab 9-5?
Simple steps on how to reset the Service light/indicator on a SAAB 9-5, 1998-2010. Please press the like button if it was helpful! CheersDisclaimer: The info… Simple steps on how to reset the Service light/indicator on a SAAB 9-5, 1998-2010. Please press the like button if it was helpful!
What’s the problem with my Saab 95 se?
I have a 2001 saab 95 se and half of the cars heat works the other doesnt only cold are comes out and its not a good feeling in the winter. Does anyone know how to fix that problem ? or whats wrong with it ? only the drivers side vents push cold air all others work fine even in the back.
Is the HVAC on my 99 Saab working?
I have a 99 Saab 9-5 my HVAC is not working correctly it will not blow any air through the system. Some air will come out once I start driving and get a little speed going , its cold on the driver side and warm on the passenger.
How to remove ABS module from Saab 9-5?
Step seven: remove the battery tray by removing its four 10 mm bolts, and remove it from the car. If you have the radiator overflow tank hose zip tied to it now is the time to cut that zip tie. Picture shows vehicle with battery tray removed. Now you will use the T20 Torx tool to remove the hardware holding the ABS module to the brake system.
Simple steps on how to reset the Service light/indicator on a SAAB 9-5, 1998-2010. Please press the like button if it was helpful! CheersDisclaimer: The info… Simple steps on how to reset the Service light/indicator on a SAAB 9-5, 1998-2010. Please press the like button if it was helpful!
How long has the Saab 9-5 been in production?
We have now owned and sold many 9-5 models, both petrol and diesel, so believe our own experiences of what to buy will be of great interest to you. The ‘Old 9-5’ was in production for 12 years and by all standards became an outstanding car, especially the Aero models from 2002 onwards.
Step seven: remove the battery tray by removing its four 10 mm bolts, and remove it from the car. If you have the radiator overflow tank hose zip tied to it now is the time to cut that zip tie. Picture shows vehicle with battery tray removed. Now you will use the T20 Torx tool to remove the hardware holding the ABS module to the brake system.
What was the problem with the Ecopower Saab?
Ecopower cars prior to 2002 were prone to sump sludge problems resulting in premature engine and turbo failures, which tarnished the model name thereafter. This was unfortunate because the engine range was fundamentally a very sound design, and if owners had insisted on a fully synthetic oil like Mobil 1, this problem would have never occurred.