How long does it take to replace a Saab transmission?
Replacement of the clutch, release bearing and slave cylinder requires removal of the gearbox. This procedure applies to 1994-on models. Manual transmission replacement for models up to 1993 is the subject of a separate procedure. Removing and refitting the gearbox took me and an assistant about six hours. Saab list 4.8 hours for this procedure.
How often should timing belt be replaced on Saab 9-3?
How to Replace timing belt on Saab 9-3 1.9 TiD (9440) 2004-2010 Published December 2, 2015 Replacement Interval Guide Saab recommend: →06MY: Replacement every 72,000 miles. 07MY→: Replacement every 90,000 miles or 10 years. The previous use and service history of the vehicle must always be taken into account. Check For Engine Damage
How do you change oil on a Saab 9-5?
Place a jack under the oil pan with a block of wood between them to distribute the force. Jack it up, and watch the top of the engine. You’ll see if lift as the weight comes off the engine mount. 6). Remove the Saab plastic engine cover around the oil dipstick.
How do you replace a pulley on a Saab?
After all the horror stories, this pulley was surprisingly easy to replace. Use a 13mm wrench to loosen it and then you can back out the bolt out with your fingers.You have to slide the pulley out with the bolt in it because the frame keeps the bolt from backing out enough.
Replacement of the clutch, release bearing and slave cylinder requires removal of the gearbox. This procedure applies to 1994-on models. Manual transmission replacement for models up to 1993 is the subject of a separate procedure. Removing and refitting the gearbox took me and an assistant about six hours. Saab list 4.8 hours for this procedure.
What to do if your Saab 900 wont start?
Video instruction Guide on How to diagnose why Saab 900 won’t start or crank up and how to do Auto Repair Service by remove and replacement parts. If you don’t want to do the work yourself you call a local mobile mechanic service that will come to you at home or any location near you.
When to replace the solenoid on a Saab 9-3?
WARNING PLEASE READ!!! IF YOU ARE NOT COMPLETELY SURE OR DO NOT HAVE THE PROPER SCAN TOOLS. WE SUGGEST PRIOR TO ATTEMPTING TO TACKLE THIS PROCEDURE TO HAVE A PROFESSIONAL DO THE REPLACEMENT. When the ignition is switched on the limp-home solenoid will be activated.
How to remove the throttle body from a Saab 9-3?
Remove the rubber bend from the throttle body and turbocharger delivery pipe. Remove the 3 throttle body retaining bolts. Remove the 3 throttle body retaining bolts. Turn the ignition switch to ONContact the Trionic and clear diagnostic trouble codes. Turn the ignition switch to OFF and wait 10 seconds.