Where is the battery on a Saab remote?
In order to get access to the battery you will need to remove the plastic cover located at the back of the remote key. If you place the key with the backside of it facing upwards and look at the side of it you can see a small hole. This hole is used to open the plastic cover and the easiest way to do this is with a corkscrew.
How do you remove a battery from a Saab 9-5?
Before you remove the battery, note that the + side of the battery is mounted facing upwards. It’s important the the new battery is mounted thesame way. To remove the battery you have to press the small plastic flap downwards, the battery will then pop up and you can now remove it gently.
What should I do if my Saab FOB is not working?
Check the barrel of the lock is coming up flush with the outer edge, if it is not, DO NOT lubricate with WD40 or similar as this will decrease the friction between the key and the lock barrel, it is the interaction between the key and the lock barrel that pulls the barrel up to the correct position.
What’s the best way to unlock a Saab?
Best option is to unlock the doors using the second key. If you only have one key… Press the Saab logo on the key and pull out the metal traditional key. Unlock the left hand front door (passenger side in UK). THE ALARM WILL SOUND. Get in and put the key in the ignition switch as normal. The alarm should stop.
How to change battery in Saab 9-3 key fob?
Aince the owner of this channel owns Saab, you can often find very useful DIY video instructions on this channel. One of the latest videos on the Saab 9-3 car is related to the key fob battery replacement, and other issues related to the Saab key fob and lock.
Check the barrel of the lock is coming up flush with the outer edge, if it is not, DO NOT lubricate with WD40 or similar as this will decrease the friction between the key and the lock barrel, it is the interaction between the key and the lock barrel that pulls the barrel up to the correct position.
Where are the remote controls on a Saab 9-3?
The remote cotrol code, wich may require synchronisation after battery replacement, in syncronised by inserting the key into the ignition! All remote controls must be synchonised by placing the key/keys in the ignition lock. The remote control’s receiver is located in the CIM.
How does the CIM work on a Saab 9-3?
The code is received by the coil in the ISM and is sent via the K-cable to the elM for control. Transponder identification is fully independent of the remote control’s battery and its status. Keys that have been programmed for one car cannot be reprogrammed for another car. If all the keys are lost, the CIM must be replaced.