Where is the off position on a Saab 9-5?
So the OFF position in the Saab 9-5 becomes the ACC position found on many other vehicles. Take out the fuse panel cover on the left side and push out the headlight switch from behind.
How does the audio system work on a Saab 9-5?
The CD player is front-feed with display for the compact disc inserted. The disc drawer holds 1 disc (diam. 8 or 12 cm). Random play and scan functions are included. The audio system uses the SID to show the current settings for the selected source. The main unit transmits the display information on the bus, from where SID reads it.
Where is the white wire on a Saab 9-5?
Take the blue/white wire and place it in position #7. This is the wire for turning on the car amplifier. Cut the orange, yellow, green and blue wires. These are not needed for a Saab 9-5 because we are only using the white wire.
How does traction control work in a Saab 9-5?
All control modules in the Saab 9-5 are connected to the bus with the exception of ABS and SRS. For cars with Traction Control, the TC/ABS control module is connected to the bus. The bus allows large quantities of data to be sent between the control modules using only two cables.
What kind of audio unit does a Saab 9-5 have?
These instructions are for a 2005 SAAB 9-5 with the AS3 Prestige audio. Different years and different Saab models may not be the same so do your own research and make sure you have all information for your particular car. Instructions are a guide, they are not complete step-by-step instructions. Some steps and other information may be missing.
So the OFF position in the Saab 9-5 becomes the ACC position found on many other vehicles. Take out the fuse panel cover on the left side and push out the headlight switch from behind.
All control modules in the Saab 9-5 are connected to the bus with the exception of ABS and SRS. For cars with Traction Control, the TC/ABS control module is connected to the bus. The bus allows large quantities of data to be sent between the control modules using only two cables.
Where is the ACC wire on a Saab 9-5?
The red wire in the Metra harness is supposed to be connected to the ACC wire on the harness. However, this wire is only powered when the ignition is in the ON position. This means your engine needs to be running in order to be able to use the head unit.
The red wire in the Metra harness is supposed to be connected to the ACC wire on the harness. However, this wire is only powered when the ignition is in the ON position. This means your engine needs to be running in order to be able to use the head unit.
These instructions are for a 2005 SAAB 9-5 with the AS3 Prestige audio. Different years and different Saab models may not be the same so do your own research and make sure you have all information for your particular car. Instructions are a guide, they are not complete step-by-step instructions. Some steps and other information may be missing.
Where is the Orange Illum wire on a Saab 9-5?
We need to tap into two wires going to the headlight switch. This wire goes to the headlight relay so it will have +12V when you turn the headlight switch to the On position (assuming your DRL’s have been disabled). This wire needs to be connected to the orange Illum wire on the head unit.
Where are the wiring harnesses on a Saab 9-5?
Saab 9-5 has eight wiring harnesses: front, power train, dashboard, front door, rear door, roof, tailgate and rear. They connect all the electrical components in the car to their intended points of connection. Some components have their own harnesses for distributing power in the component.
Where are the fuses in a Saab 9-5?
The main fuse box 342a and main relay board 342b in the engine bay are built in to one unit. The distribution units in the dashboard are divided into two separate units: These leads are unfused and great care must be exercised when measuring the voltage in these circuits.
Take the blue/white wire and place it in position #7. This is the wire for turning on the car amplifier. Cut the orange, yellow, green and blue wires. These are not needed for a Saab 9-5 because we are only using the white wire.
Can a PAC SWI-PS be installed on a Saab 9-5?
This tutorial describes on how to install the PAC SWI-PS steering wheel controls adapter. This worked fine on my car with manual transmission but there are some issues in using this adapter and the paddle shifters with an automatic transmission. In a Saab 9-5 with automatic transmission, it is recommended to use the PAC SWI-RC.