What kind of bypass valve does a Saab use?
Saab turbo bypass valve (hooter valve) for any 16v 900 85-98, 9000 86-88, 91-98 all, 9-3 all, 9-5 all. Volvo: Turbo by-pass valve for any S80 turbo 99-06. 1 per car. The Genuine Saab version is no longer a “Bosch” unit. Bosch has discontinued making the part and all stock has been depleted. The Genuine Saab version is now “Kayser”.
What’s the maximum boost level on a Saab engine?
The Boost Pressure Control (BPC) Valve is used to control the level of boost above 0.4 bar. On a stock engine (with no modifications), the maximum boost level is set to 0.8 bar, or between 12 and 13 psi. Fig. 1 – BPC Location Diagram Fig. 2 – BPC Location Pictures
What kind of car is a Saab 9-3?
Vehicle Fitment: SAAB: 9-3 1999-03 | 9-5 1999-09 | 900 1985-98 | 9000 1986-88 | 9000 1990-98 – Volkswagen: Beetle 1999-00 | Golf 2000-01 | Jetta 1999-01 – Volvo: S80 1999-05 After WW2 Swedish Aerospace manufacturer Svenska Aeroplan AB needed a profitable outlet for its engineering and production capabilities.
Is there a Bosch unit in a Saab?
The Genuine Saab version is no longer a “Bosch” unit. Bosch has discontinued making the part and all stock has been depleted. The Genuine Saab version is now “Kayser”. Vehicle Fitment: SAAB: 9-3 1999-03 | 9-5 1999-09 | 900 1985-98 | 9000 1986-88 | 9000 1990-98 – Volkswagen: Beetle 1999-00 | Golf 2000-01 | Jetta 1999-01 – Volvo: S80 1999-05
Where is the pressure control valve on a Saab?
If not, the valve should be replaced. The valve has three hose connections. Turbo compressor, which is the source of air pressure, waste gate actuator, which is operated by the air pressure, and the air intake which is used to bleed off air above base boost. The valve is normally open from the compressor to the waste gate, and closed to the intake.
The Boost Pressure Control (BPC) Valve is used to control the level of boost above 0.4 bar. On a stock engine (with no modifications), the maximum boost level is set to 0.8 bar, or between 12 and 13 psi. Fig. 1 – BPC Location Diagram Fig. 2 – BPC Location Pictures
Where is the heater bypass valve on a Saab 9-5?
This is also known as the heater/coolant bypass valve. These instructions are for the 2005 Saab 9-5 but should be the same for all model years. The solenoid valve is located in front of the bulkhead above the water shut-off valve. 1. Open the expansion tank cap and release any overpressure. Refit the cap.
Where is the pressure valve on a turbo?
Turbo compressor, which is the source of air pressure, waste gate actuator, which is operated by the air pressure, and the air intake which is used to bleed off air above base boost. The valve is normally open from the compressor to the waste gate, and closed to the intake.
How do you remove the Turbo from a Saab?
(1) Disconnect the Turbo bypass. You don’t need to disconnect the vacuum line from the turbo bypass valve, but merely place it aside once released. (1 cont.) This can be done by removing the clamp (arrow at bottom of picture) then remove the turbo bypass tube (one 10MM bolt and clip holding it into the Turbo intake Pipe/Cobra Pipe).
Where is the banjo bolt on a Saab turbocharger?
(17 cont.)Remove the 12MM banjo bolt from the turbo coolant return line and remove the rubber coolant line which has a hose clamp (circled in blue). (17 cont.)Remove the 10MM bolt which holds the turbo coolant return line in place. It is located approx. halfway between the turbo and banjo bolt just removed.
Saab turbo bypass valve (hooter valve) for any 16v 900 85-98, 9000 86-88, 91-98 all, 9-3 all, 9-5 all. Volvo: Turbo by-pass valve for any S80 turbo 99-06. 1 per car. The Genuine Saab version is no longer a “Bosch” unit. Bosch has discontinued making the part and all stock has been depleted. The Genuine Saab version is now “Kayser”.
Vehicle Fitment: SAAB: 9-3 1999-03 | 9-5 1999-09 | 900 1985-98 | 9000 1986-88 | 9000 1990-98 – Volkswagen: Beetle 1999-00 | Golf 2000-01 | Jetta 1999-01 – Volvo: S80 1999-05 After WW2 Swedish Aerospace manufacturer Svenska Aeroplan AB needed a profitable outlet for its engineering and production capabilities.
What is the P number on a Saab 9-3 alarm?
Original P/number is 12783781.Saab 9-3 Alarm Remote Fob/Transmitter. 433.92mhz. NEW REMOTE FOB/TRANSMITTER!! Saab Griffin logo for the hood. This is an Original Equipmet Part. Utilizing a plastic wedge or flat tip screw driver you need to pry off the existing silver disc.
What kind of spark unit does a Saab use?
Saab Genuine Direct Ignition Module (55559955) – 9-5 and 9-3 OEM. 1 YEAR PART WARRANTY! Genuine Saab Direct Ignition Cassette. Distributes spark. Note: This unit is Black, and is not interchangeable with the Red unit.