Do you need to replace the gearbox on a Saab 9000?
Manual transmission unit (gearbox) removal and refitting is a long job but is not complicated when broken down into steps. Replacement of the clutch, release bearing and slave cylinder requires removal of the gearbox. This procedure applies to 1994-on models.
When did the Saab 9000 get a name change?
This all-new 900 was produced in the 1994 through 1998 model years. In Mid 1998 it received over 1100 individual improvements (although some were actually introduced on the 1998 model 900), and was renamed the Saab 9-3 (in most markets; in the US the name change was introduced for 1999). As the 9-3, the NG900 was produced through 2002.
What kind of engine does a Saab 900 have?
Variants included 900i (4-cylinder, non-turbo), S (4-cylinder, non-turbo) and SE (4-cylinder turbo or V6) models in three-door, five-door and convertible body styles. For 1997 and 1998 only, there was also a Saab 900 Talladega, after a record-breaking endurance test in 1996, on the Talladega Superspeedway.
When did the Saab 900 go to Talladega?
For 1997 and 1998 only, there was also a Saab 900 Talladega, after a record-breaking endurance test in 1996, on the Talladega Superspeedway.
Manual transmission unit (gearbox) removal and refitting is a long job but is not complicated when broken down into steps. Replacement of the clutch, release bearing and slave cylinder requires removal of the gearbox. This procedure applies to 1994-on models.
When did the Saab 9000 come out in Sweden?
Saab 9000. The Saab 9000 is an automobile produced by the Swedish company Saab from 1984 to 1998. Representing the company’s foray into the executive car scene, it was developed as a result of the successes of the turbocharged 99 and 900 models.
What was the drag resistance of the Saab 9000?
Drag resistance for the original model is C d 0.34, very competitive for the time. The Saab 9000 was awarded Best Prestige Car 1985 by the French magazine L’Action Automobile. At the end of 1985 (with cars of MY 1986) the 9000 was rolled out in the most important foreign market for Saab: the US.
How long does a Saab 9000 Turbo 16 take to drive?
All three 9000 Turbo 16s passed the 100,000 [KM] mark in 21 days, the lead car breaking 21 international and two world speed records in the process. In memory of this event.
When did the Saab Direct Ignition come out?
Saab Direct Ignition was introduced 1988 with the 9000 CD and its B202 turbo engine. The same engine in the CC got the DI with MY 1989. Since then all new engine releases for the 9000 got the DI from beginning (except the later V6 which came from GM).
What kind of transmission does a Saab 9-3 M03 have?
Saab 9-3 (9440) M03- with transmission alternative FM67, FM68 or FM6A. Background The driver may experience that the gearbox is sluggish, specifically during shifting from 1st to 2nd and from 3rd to 2nd gear. The fault is due to cramped lateral spaces both in the gearbox and gear lever housing.
How to adjust gear cables in a manual transmission?
Hold it in this position and push the screwdriver against the crescent shaped section of the adjustment catch at the same time. An audible click means that the catch has fastened in the correct position. Repeat the procedure on the other cable adjuster. 4. Transmission\\Manual gearbox Bulletins – SI/MI – (471-2421 ut… 9-3 (9440) 4 2004 3
How do you adjust the gear on a car?
Move the gear lever to the left. Note:Use a single finger to carefully move the lever to the left. Hold it in this position and push the screwdriver against the crescent shaped section of the adjustment catch at the same time. An audible click means that the catch has fastened in the correct position.
Where is the jumper lead on a 1988 Saab 900?
(1988-92 LH 2.4, 2.4.1 & 2.4.2) Read the following procedure carefully before turning ignition on. On 900 models, use a switched jumper lead No. 8393886 to ground No. 3 pin in the three-pin test connector located on the right side of engine compartment.
Who is the official distributor of Saab parts?
Approved Parts Distributor. Saab USA Parts is a distributor of Saab Auto Parts in the U.S. pursuant to an agreement with Saab Automobile Parts North America, the exclusive authorized importer and distributor of Saab parts and accessories in the U.S. and Canada.
What kind of engine does a Saab trouble code have?
Trouble Code Identification Model Year Engine identification System 9-5 2.3L Turbo 1999-09 4 cylinder Trionic T5/T7/T8 9-5 3.0L 1999-03 6 cylinder Trionic T5/T7 9-7X 4.2/5.3L 2005-09 6/8 cylinder GM 9-7X 6.0L 2008-09 8 cylinder GM