Is there an ignition lock on a Saab 9-3?

Of course, There is no mechanical ignition lock to break (Saab 9-3) and the engine requires a unique rolling code from the electronic key to start. Furthermore, the electronic steering wheel lock will only open with the correct key code.

Where can I find the key to my Saab?

On this page you’ll find an easy way to find the correct key, remote/transmitter, or other key parts for your Saab! NOTE: All orders for VIN-specific cut keys require entering your VIN in the box during checkout and can only ship via 1-Day or 2-Day FedEx Air.

Can a steering wheel lock work on a Saab?

Furthermore, the electronic steering wheel lock will only open with the correct key code. And if in addition you specify our advanced car alarm, you can be sure of one thing: your Saab will always be on its guard.

What happens if a window is smashed on a Saab 9-3?

If a window is smashed the Deadlock makes it almost impossible to unlock the car from inside. Electronic key – remotely operates the central locking. Rolling digital codes make it virtually impossible for an unauthorised person to copy the code of your electronic key . The theft protection of the Saab 9-3 and 9-5 has attracted considerable praise.

How to remove ignition switch cylinder on Saab 9-5?

This is for a 2004 Saab 9-5 and I assume it is the same for all first generation Saab 9-5 model years. Remove the transponder by turning it clockwise and lift up. The plastic cover on mine is pretty loose so I took that off first so I could see what is underneath.

What happens when the cylinder is removed from a Saab?

When the whole cylinder is removed from the housing you will be presented with the lock mechanism made up from spring loaded brass plates going into the cylinder. These plates go flush with the cylinder surface when the key is inserted, allowing the cylinder to turn.

How do you change the battery on a Saab 9-3?

This is easily done using a battery knife switch that can be obtained from most RV dealers. Connect the knife switch to the negative battery post with the ammeter across the switch. Keep the knife switch closed except when actual draw readings are being read. This will insure normal current is available to all systems while time is passing.

Why does my Saab 9-3 won’t start?

Same symptoms: wait for an unspecific amount of time and it starts with a diagnostic code U0212 (Lost communication with steering column module) stored on the ECU. My fuel gauge hovers around Empty which points to fuel pump shutoff by the ECU.

Is it possible to buy a Saab 9-3?

Because of that, like the Saab 9-5, it is possible to buy a fantastic car for pennies on the dollar (we picked up a running 9-3ss for our next race car for $500). However, like most cars bottoming out in value, it’s important to keep an eye out for the top 10 most common Saab 9-3 problems.

Is there a way to disable the alarm on a Saab?

However, if you don’t want to take the time to lock your Saab every time you exit the vehicle, you’ll find it easier to disable the alarm entirely. Place the key in the ignition and start the vehicle.

Is there theft protection on the Saab 9-3?

The theft protection of the Saab 9-3 and 9-5 has attracted considerable praise. Not from burglars, but from motoring magazines whose best experts have tried to force the system. With poor result. And that’s no wonder, since it was developed in co-operation with leading insurance institutes.

Why does a Saab have a deadlock function?

Saab “Deadlock” function basically makes it harder for would be thieves to steal a car or remove interior components from it. Part two is designed to guard against theft of contents.

Why is the key not turning on my Saab 9-3?

Saab 9-3 Key Won’t Turn Repair Symptoms. When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns.

How to fix steering lock on Saab 9-3?

Put the key in the ignition and take it out for your cockpit lights to turn on and then insert key once again to start the car. I typically wait for the red security light on the dash to stop blinking before starting just to give the car time to process the key. NOT A PERMANENT FIX but works until you can get the problem looked at.

Where is the ignition switch located on a Saab 9-3?

The ISM (Ignition Switch Module) is where the key is inserted. The CIM (Column Integration Module) is located inside the steering wheel. It is the security centre and controls the central locking, ignition, immobilisation, steering lock etc.

Where is the CIM located on a Saab 9-3?

The CIM (Column Integration Module) is located inside the steering wheel. It is the security centre and controls the central locking, ignition, immobilisation, steering lock etc. Both of these could be the culprit.

What does dead lock do on a Saab planet?

And if in addition you specify our advanced car alarm, you can be sure of one thing: your Saab will always be on its guard. Dead locking means the doors cannot be unlocked from inside, you can still unlock the doors using the key.

What to do if your Saab key won’t turn?

If you are in a place where it’s been very cold you can try warming the area up with a hair dryer. I Googled this “forum Saab 9-3 ignition switch”, without the quotes, and got lots and lots of hits, so it looks like the problem is frequent.

Can you change the gear on a 2002 Saab 9-3?

We have a 2002 Saab 9-3 automatic car. We inserted the key in the ignition and it wouldn’t turn. It’s not possible to change the gear even. Three days back when we drove it, it worked fine. Don’t know what has happened since.

Where is the keyhole on the Saab boot lid?

If you have a keyhole, it will be in lid in the area of the right hand light. Help support SaabTechTalk by making a Lump Sum donation or by opening a subscription. Options available are in your Profile/Actions. Re: Boot lid won’t open…….. When the panel is removed what do I look for to open the lid from the inside?

Why is my Saab 9-3 door lock not working?

The central locking door lock mechanisms on Saab 9-3s (and 9-5s) are known to occasionally malfunction/stop working. When you hit the central locking button on the remote, the affected door often won’t lock (or won’t unlock if it was already locked). The issue tends to start out intermittent and then worsen with time.

How much does a Saab door lock unit cost?

When you hit the central locking button on the remote, the affected door often won’t lock (or won’t unlock if it was already locked). The issue tends to start out intermittent and then worsen with time. A new unit is currently around £140 (without labour), but they can be obtained second hand on ebay for around £30.

How do you fix central locking on a Saab?

It’s easy to fix. Just remove a few panels in the left footwell (non-UK/JP) above the clutch pedal and find the plastic box with a wiring harness plugged into it. It should be held up there by a metal clip that engages a peg holding it in place on a piece of sheet metal in there.

Where is the door card on a Saab 9-3?

To access the door locking mechanism, we need to remove the door card and disconnect some cabling etc. There are two screws holding the door card in place, both located under the inner handle. You need to carefully prise the handle apart to access them: The two screws have Torx heads, you’ll need a long driver to reach the middle one.

How do you remove ignition cylinder from Saab?

Use an Allen key (hex wrench/key) or other curved metal rod/tool to push in the release on the ignition cylinder. You have to push a bit to the side in the direction of the red arrow. The top of the red arrow ponts to the release on the cylinder.

Can a key be removed from the lock cylinder?

If the ignition switch is turned to the “lock” position when the vehicle speed is over 5km/hour, the ignition key cannot be removed from the lock cylinder. This is not a defect, but a normal design feature. In order to remove the key: Turn the ignition to the “on” position, wait several seconds, turn ignition to “lock” and remove the key.

Why is my key fob stuck in off position?

Key fob is stuck in off position can’t get it into locked postulation to remove it. not fixed. car won’t start. had to rip the key fob (remote?) out of the ignition. won’t turn back to LOCK, car won’t turn off but also won’t start. just had to leave it there and the battery is now dead. no updates thus far.

What happens when you remove the ignition key?

The ignition barrel is supposed to pop up slightly when you remove the key from the ignition switch. It is common this mechanism gets dirty after a while so it doesn’t pop up after you remove the key and the car thinks it is still in the OFF position.

What to do if your ignition key is bent?

Bent keys can sometimes enter the ignition cylinder, but once inside will not line up correctly to allow the car to start. If your key looks visually bent, you can use a non-metal hammer to carefully flatten the key down. Your goal is to use something that will not damage the key, so ideally this would be made of rubber or wood.

How do you remove a lock cylinder from a car?

Remove the lock cylinder by pressing in the catch with the welding rod and withdrawing the cylinder straight up. 1. Fit the lock cylinder in place and press it well home. Make sure it is firmly located. 2. Fit the transponder. Did your cylinder have a door?

Navigation