Should I turn VSA off?
It assists in maintaining traction on slippery surfaces by regulating engine output and selectively applying the brakes. VSA is turned on every time you start the vehicle. If you turn VSA off, your vehicle has normal braking and cornering ability, but VSA traction and stability enhancement become less effective.
What is the Check Engine Light ( CEL ) on a VSA?
Upon entering the park the check engine light (CEL) came on along with the two lights associated with the VSA and the enginebegan to run rough and would not produce power. I pulled over and began to trouble shoot.
What happens when the VSA system is off?
When VSA is off, the VSA Activation Indicator light comes on as a reminder. Pressing the switch again turns the system back on. Driving VSA SYSTEM INDICATOR Vehicle Stability Assist (VSA) System VSA is turned on every time you start the engine, even if you turned it off the last time you drove the car. VSA and Tire Sizes
Why does my VSA light keep coming on?
Your VSA Light Is On – Most Likely Cause If you have just noticed that your yellow triangle surrounding an exclamation point VSA warning light has come on, the most likely cause is you shut the system off accidentally. In vehicles a few years old, the system has a manual button that you can press to shut the system off in certain situations.
Why does VSA turn on every time you start the car?
Vehicle Stability Assist (VSA) System VSA is turned on every time you start the engine, even if you turned it off the last time you drove the car. VSA and Tire Sizes Driving with varying tire or wheel sizes may cause the VSA to malfunction. When replacing tires, make sure they are of the same size and type as your original tires (see page 245).
Why does the VSA light come on after you turn off the engine?
Problem occures when driven a few hundred yards and remains until car is switched off and then restarted. VSA lighr goes off then but engine light remains on. HOW about fixing the engine light FIRST , because that is most likely WHY the VSA light comes on. Have engine codes read and post them here.
What happens if VSA does not come on?
If the indicator does not come on when the ignition switch is turned ON (II), there may be a problem with the VSA system. Have your dealer inspect your car as soon as possible. Without VSA, your car will have normal braking and cornering ability, but it will not have VSA traction and stability enhancement. VSA Off Switch
How to troubleshoot the VSA system in Honda?
How to Use the HDS (Honda Diagnostic System) 1. If the indicator(s) of the system stays on, connect the HDS to the data link connector (DLC) (A) located under the driver’s side of the dashboard. 2. Turn the ignition switch ON (II). 3. Make sure the HDS communicates with the vehicle and the VSA modulator-control unit.
What to do when VSA comes on while driving?
The VSA system indicator (see page 56 ) comes on and stays on when there is a problem with the VSA system. If the VSA indicator comes on while driving, pull to the side of the road when it is safe and turn off the engine. Reset the system by restarting the engine, and watch the VSA system indicator.