Why is my 2005 Renault Scenic not starting?
The latest in a long line of problems with a 2005 Scenic. *edit* In the end this was a fuse problem, the fuse box is behind the battery Category People & Blogs Show moreShow less Loading… AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next Renault Megane ll 1.6 16v 2003 not starting. No crank.
What can I do to fix my Renault Scenic?
Replaced belt still doing the same. Stripped out belt tensioner, the self lubricating bearings were dirty and binding. Cleaned bearings and shaft with solvent, lubricated with a small amount of silicone grease. Problem solved.
What should I do if my pulley fails on my Renault Scenic?
Owners should be very wary of belt, tensioner or pulley failure due to the potential disasterous consequences. Owners should check for signs of wear and cracking, especially across the grooves which run longitudinally, signs of fraying and if there are any noises eminating from the belt area get them checked out.
Why does my Renault Scenic make a whistling noise?
I took the tensioner pulley wheels off so I had them with me to take to Renault and noticed that when you spun the tensioner pulley wheel it made a noise like an old roller skate wheel !. This must have been the cause of the whistling noise. The power steering pump and alternator pulleys spun cleanly without noise so presumably are ok.
Why did my Renault Scenic fail to start?
The latest in a long line of problems with a 2005 Scenic. *edit* In the end this was a fuse problem, the fuse box is behind the battery The latest in a long line of problems with a 2005 Scenic. *edit* In the end this was a fuse problem, the fuse box is behind the battery Skip navigation Sign in Search Loading… Close This video is unavailable.
I took the tensioner pulley wheels off so I had them with me to take to Renault and noticed that when you spun the tensioner pulley wheel it made a noise like an old roller skate wheel !. This must have been the cause of the whistling noise. The power steering pump and alternator pulleys spun cleanly without noise so presumably are ok.
Owners should be very wary of belt, tensioner or pulley failure due to the potential disasterous consequences. Owners should check for signs of wear and cracking, especially across the grooves which run longitudinally, signs of fraying and if there are any noises eminating from the belt area get them checked out.
Why is my fan belt not working on my Renault Scenic?
This was caused by the spring tensioner doing up the belt too tight and the belt vibrating at certain engine speeds due to the spring. The solution was to make an aluminium bracket out of a flat bar to allow the fan belt to be set to a fixed tension.