What oil do I put in Aisin transmission?
Mobil ATF 3309 is recommended for use in transmissions made by Aisin-Warner requiring a fluid approved against Type T-IV, JWS 3309, GM 9986195 and VW/Audi G-055-025-A2.
What kind of transmission fluid does Land Rover use?
Frequently replacing your Land Rover transmission fluids will ensure the proper function and longevity of your vehicle’s transmission for years to come. Atlantic British carries the finest in Genuine Part automatic transmission fluid designed specifically for your model Land Rover or Range Rover.
What kind of transmission does a Discovery 3 use?
This is an easy change filter conversion kit for all vehicles using the ZF 6HP26 automatic transmission – Discovery 3, Discovery 4, Range Rover Sport and Range Rover L322 models. From the factory a fluid and filter change on this transmission is a very lengthy process.
How do you change transmission fluid in a LR4?
Slide the old sump out and remove the other end of the sawn off filter tube. The new separate filter can then be fitted and the new sump pan slides into place and is bolted up with the new gasket supplied. Once secure the transmission can be filled as per manufacturer’s instructions.
How to check and refill transmission fluid on Discovery 2?
The vehicle must be level and the transmission must be at room temperature (between 68-104 degrees F). The transmission cannot be any hotter than just warm to the touch. If you have just changed the filter or the fluid, remove the check/filler plug located at the right front of the transmission pan.
Frequently replacing your Land Rover transmission fluids will ensure the proper function and longevity of your vehicle’s transmission for years to come. Atlantic British carries the finest in Genuine Part automatic transmission fluid designed specifically for your model Land Rover or Range Rover.
This is an easy change filter conversion kit for all vehicles using the ZF 6HP26 automatic transmission – Discovery 3, Discovery 4, Range Rover Sport and Range Rover L322 models. From the factory a fluid and filter change on this transmission is a very lengthy process.
Slide the old sump out and remove the other end of the sawn off filter tube. The new separate filter can then be fitted and the new sump pan slides into place and is bolted up with the new gasket supplied. Once secure the transmission can be filled as per manufacturer’s instructions.
The vehicle must be level and the transmission must be at room temperature (between 68-104 degrees F). The transmission cannot be any hotter than just warm to the touch. If you have just changed the filter or the fluid, remove the check/filler plug located at the right front of the transmission pan.