How do you remove odometer from Porsche 911?
STEP 1: Odometer Removal. Using a cloth covered screwdriver, gently pry the speedometer out from your dashboard. The rubber ring around the edge comes out too so get under that with the flat screwdriver and pry out. Do NOT use the neighboring gauge as a leverage point. The black trim ring is very easily scratched.
How to remove speedometer from Porsche 911sc-1979?
Remove the speedometer, then check if the cable is OK, when the vehicle stationary it should rotate. if it looks OK, try rotating the speedo drive, does the speedo work? – Nick at Pelican Parts Comments: I’m attempting to fix my speedometer 911SC-1979 and I have it removed from the dash but can not seem to remove the wires with the orange bases.
How do you remove the gauge cluster from a Porsche 997?
Underneath the trim panel are two Torx screws that secure the bottom portion of the gauge cluster in place. Remove the two Torx screws, preferably using a magnetic driver to avoid losing the screws. Figure 4. Torx screws removed. The gauge cluster is now ready to be separated from the dash.
How do you remove the speedometer from a pelican?
Thanks! The black wires, those plugging into the red plastic pieces, are the bulbs that illumiinate the speedo. They come out WITH the nylon block, and with the metal ring at the base of that block. Just carefully pry them away from the body of the unit with a fine screwdriver blade.
STEP 1: Odometer Removal. Using a cloth covered screwdriver, gently pry the speedometer out from your dashboard. The rubber ring around the edge comes out too so get under that with the flat screwdriver and pry out. Do NOT use the neighboring gauge as a leverage point. The black trim ring is very easily scratched.
Remove the speedometer, then check if the cable is OK, when the vehicle stationary it should rotate. if it looks OK, try rotating the speedo drive, does the speedo work? – Nick at Pelican Parts Comments: I’m attempting to fix my speedometer 911SC-1979 and I have it removed from the dash but can not seem to remove the wires with the orange bases.
How do you remove gauge from Porsche 997?
With the steering wheel now lowered, the lower gauge trim piece is now easily accessible. To free the trim, simply pinch the piece in the center with your fingers, and pull it towards you. The trim is secured by two clips on the backside, which requires a bit of force to free.
Can you change the instrument cluster on a Porsche 997?
A Porsche 997 instrument cluster. If installing an entire new instrument cluster, a PIWIS diagnostic tool is needed to program the previous cluster’s settings into the new cluster. Dash Rattle Solved!